| Product Description |
| With Transition Networks' Full-Featured 100BASE-TX to 100BASE-FX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before. These converter automatically detect and report loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. They also automatically detect faults in a link using Remote Fault Detection. This feature allows you to troubleshoot a fault, even if it is only in one direction, via a pulse to the link signal on the transmit side of the same connection; alerting the remote device on the same side as the failure. This is the single mode SC converter with supported length of up to 20 km. |
| |
| General |
| Enclosure Type: | | External | | Weight: | | 0.9 kg | | Dimensions (WxDxH): | | 7.6 cm x 11.9 cm x 2.5 cm |
|
| |
| Expansion / Connectivity |
| Interfaces: | | 1 x network - Ethernet 100Base-TX - RJ-45 female - 1 | | Connections: | | 1 x network - Ethernet 100Base-FX - SC male - 2 |
|
| |
| Networking |
| Connectivity Technology: | | Wired | | Cabling Type: | | Ethernet 100Base-FX, Ethernet 100Base-TX | | Data Link Protocol: | | Fast Ethernet | | Data Transfer Rate: | | 100 Mbps | | Status Indicators: | | Power, receive | | Compliant Standards: | | IEEE 802.3u |
|
| |