The new RF-603 is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.
1. Works as a wireless shutter release control
- Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported
- Depending on the camera model a special shutter release cable is included in the package
2. Transceiver based system - works as a wireless flash trigger and receiver
- Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear.
- As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver.
- Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
- Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
- As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera.
- One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
3. Wireless trigger studio flash
- Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification (each item)
FSK 2.4GHz wireless remote system
15 different channels and all channels
Half-way press, full-way press
PC Sync, 2.5mm for shutter release
Time of shooting
Up to 20000 times
Receiver stand-by time
Up to 45 hours (using AAA batteries)
37mm x 30mm x 81.5mm
- Canon: EOS 7D, 50D, 40D, 30D, 5D, 20D, 10D, 5D Mark II, 5D Mark III, 1D X, 1D Mark IV, 1Ds Mark III, 1D Mark IIII, 1D Mark II N, 1Ds Mark II, 1D Mark II.
- Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible
- Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
- Supports the "sleep mode" or "wake up" mode which some flashes are equipped with
- Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX, 320EX
- Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
- Not compatible with Nikon SB-600
- Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
- Olympus FL-50, FL36
- Fuji Film：S3Pro / S5pro
- Nissin, only newer models are compatible, please check before purchase
- Sigma EF-500 DG Super, EF-500 DG ST, EF-430
- Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D
- Vivitar 285HV
- Yongnuo YN460, YN462, YN465, YN467, YN468, YN560
- Not compatible to Sony/Minolta flashes
- 4 x Transceivers
- 2 x Shutter release cable C3
- 1 x User manual in Chinese and English
We offer 1 year restricted warranty. ThePhotoGadget will send
the repaired item or an new item in exchange to the buyer free
of charge through standard delivery in case of warranty. Buyer
has to send in the item in original condition and pay for return shipping
fee. ThePhotoGadget has to agree with the send back and make
sure the item is in undamaged condition and was used properly.
Please contact us us before sending back. We will provide you a
send back address.
Our worldwide standard free shipping service and US economic free shipping service takes normally 10 to 15 business days via China Post Office with a tracking number to most countries and regions, 4 to 8 weeks to South American countries, Italy and remote areas. Our ePacket delivery to USA which costs extra freight takes normally 7 to 12 business days with a tracking number which can be tracked at USPS website.Depending on different post services, your local post office might delivery the package to your door or you might need to pick it up on person.
We also provide Expedite Shipping Service with extra cost. Expedited Shipping Service normally takes only 4-6 working days (sometimes 7 working days if the destination is remote). No delivery on Saturdays, Sundays and public holidays with Express Service. Our shipments do not include destinations in remote areas, islands where delivery agents charge extra cost.
We ship your order within 1 business day except Sundays and public holidays. Please keep in mind especially the exceptionally two long public holidays in China---the national holiday from Oct 1st till 5th and Chinese spring festival from end of Jan to beginning of Feb (around 1 week and exact date is changing from year to year). Please kindly understand that international shipment is more complex and out of our control, additional time can apply for different countries and regions. Due to the Security reason, traffic congestion, adverse weather, acts of custom inspection etc, delivery time may always vary. We herein appreciate your precious time of waiting for its arrival in advance!
When the parcel reaches you, please do check all the parts and goods quantity inside before signing it. If there are any physical damages, missing items or wrong quantity, please do not sign it and request the post office or the delivery company to issue some relative certification in order for compensation. Then contact us immediately.
Depending on local laws of different regions, custom duty or VAT could apply. ThePhotoGadget is not responsible for this fee. Please consult your local authorities if it occurs.
We ship your order to the address provided by your Paypal, please make sure it is the delivery destination. We are not shipping to P.O box. Tracking number and method will be sent to your message box after shipment..
Information and Notes
- For further information, please contact us by eBay message
- All pictures shown are just for reference, the real product may be different in detail
- Batteries, cameras and accessories if not listed as package content are not included
- Product updates are always possible