for 12V, 24V, 36V and 48V Lead Acid Battery
Save money by extending the life of battery
It can use for any 12V, 24V, 36V and 48V
battery bank. New and old batteries.
Works on batteries:
fork lift truck battery
golf car battery
deep cycle battery (flooded acid and
Advantage of using the battery desulfator:
Extend the life of lead acid
Restore the full capacity of
Battery charge faster
Prevents sulphate built-up
Auto cut-off function to
prevent over discharge of battery
Automatic voltage selection:
12V, 24V, 36V and 48V
Why using the battery desulfator?
Batteries often fail because
“sulphates” slowly develop and cover the battery plates. This sulphating
process also weakens the electrolyte and this combined with the gradual coating
of the plates slowly and almost imperceptibly reduces the battery’s ability to
receive, store and then deliver power. This sulphating process gradually
impairs battery function and causes a capacity loss until the battery can no
longer perform the desired task and so the battery is deemed to have “failed”.
However using a Battery Desulphator can reverse the process by
dissolving the sulphates, cleaning the plates and restoring the electrolyte
strength therefore improving a battery’s life and capacity for an extended
period. The Auto Pulse Battery Desulphator/Rejuvenator/Recovery unit uses no
external power and generates a high-frequency pulse to dissolve a battery’s “sulphates”.
of battery desulphator
The High-frequency Peak Pulse delivers
an electronically controlled pulse to the battery causing crystalline sulphates
to dissolve back into the electrolyte. This helps restore battery function and
electrolyte strength and will regain the batteries ability to receive charging
current and deliver discharge current.
Many desulphator products use an old
technology inductor design to generate the pulse to desulphate a battery. This
old technology creates a harsh inductor peak that can be damaging to the
Utilising our new capacity pulsing
method, a “soft” peak is generated so sulphates will dissolve without damaging
the battery plates. Old technology also requires a large inductor so it
necessitates a physically large desulphator device whereas using our advanced
technologic design, the Auto Pulse Desulphator device is very compact yet
provides BIG performance.
the red connector to the positive battery terminal and the black connector to
the negative battery terminal. It does
not revive physically damaged
batteries or batteries with dead cells.
It is recommended you do not remove the device
from the battery. Keeping the pulse on
the battery permanently will prevent sulphate from developing inside the
battery. The longer the device is connected to the battery, the greater the
improvement. A battery permanently
charged and treated with the device will be at the top of its capacity for
years. If the device is removed,
sulphates will again begin to accumulate and reduce battery capacity.
Display Cut-off voltage
12V battery C12 11.0V
24V battery C24 22.0V
36V battery C36 33.0V
48V battery C48 44.0V
Auto-setting for 12V, 24V, 36V and 48V
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000Hz
LED light indicates when pulse working
Ship by Canada Post to Canada
Outside Canada ship from Hong Kong
by air mail.
Customers responsible for the
duties and taxes.