KCA Kable 4 Gauge Complete Amp Install Kit
KnuKonceptz KCA amp installation kit features our oversized Copper Clad Aluminum (CCA) The KCA Kable uses the same ultra flex PVC found in the Kolossus Fleks Kable and the CCA conductor from the KLMX Kable. Copper Clad Aluminum (CCA) is made up of 90% Aluminum and 10% Copper. CCA overall provides a cost effective solution to most audio systems. Assembled from stranded 34 gauge CCA, the KCA Kable is equal in size to the Kolossus Fleks Kable, but is designed for lighter current loads and not lightening your wallet.
The In line AGU fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 18' as one unit and using the fuse holder to "splice" a few feet of wire)
The KCA-K4 is a complete kit, meaning additional mo additional parts are required to complete your installation.
KnuKonceptz KCA 4 Gauge Complete Amp Installation Kit includes:
-18 Feet 4 Gauge Ultra Flex Blue KCA Power Wire
-3 Feet 4 Gauge Ultra Flex Black KCA Ground Wire
-One inline fuse holder with 80A AGU Fuse
-One 17 Foot Black Bassik RCA Cable with Built in Turn On lead
--20 Feet TCA Clear 14 Gauge Tinned CCA Speaker Wire
-2 Silver Plated 4 Gauge Ring Terminals, 2 Silver Plated 4 Gauge Spade Terminals
-Wire ties and grommets
KCA Kable 4 Gauge Spec:
-KCA Kable Power / Ground Wire consists of oversized, 34 gauge stranded, copper clad aluminum (CCA) conductors
-Maximum load @ 20 feet - 100A
-Outer diameter - 11mm, Conductor diameter ~8mm
How many watts can this amp kit handle?
At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 30A fuses = 60A total draw) If this number is under 80A, this kit will fit your application. If over 80A, a larger gauge wire would be required or use our Kolossus Flex 4 gauge amp installation kit
What is the small 18 gauge wire built into the RCA cable for?
This is the remote turn on lead for your amplifier. One end is connected to either the power antenna lead or Amp turn-on lead of your headunit's wiring harness. While the other end connects to the amplifier's turn-on connector (REM)
Can I alter this kit in any way before purchasing?
Our amp kits are made in large batches to reduce cost, which is passed onto you. We can not alter them in any way. Should you need to make alterations, you would have to purchase the items individually from our shopping cart.
What do we mean by "Oversized"? Above (top left) is Stinger PRO 1666 strand 4 Gauge (Black) and our KLMX 4 Gauge (silver pearl) - pretty substantial difference in the two cables......Ask other sellers for cross sectional images of their cable...they wont reply....
The power wire and speaker wire comparison was part of a complete Amp Kit review, see our website for full photos and details on how other entry level amp kits faired against our KCA/KLMX series.