| | | - |
TT520 Flash Speedlite for Canon 50D 40D 30D 20D
| | This product is compatible with many camera with the standard hot shoe (such as Canon, Nikon, Pentax, Olympus etc.) Power Management
- Switch to the ON, the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT520 is ready to shoot.
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
- If the red charging indicator lamp flickers in every 1s, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries
Power Control - The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level.
- Press "+" to make power higher and they are 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1. Otherwise, press "-" to make power lower.
M Mode
Press the MODE key to M Mode. In this mode, you can set TT520 On to your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal.
S1 Mode
- Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment.
- When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger.
S2 Mode Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash.
Power-saving Function
- To save battery power, the flash will enter stand-by state in about 30 minutes of idle use.
- In S1/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use. Press any button to wake it up.
- In Power-saving mode, the charging indicator flickers in every 3 seconds. Other Indicators are turned off.
Protection Function
- Protection in continuous flashes:To prevent the flash head from getting too hot and damage, please do not flash over 20 times when in power lever 1/2,1/1. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down the flash unit around 10 minutes and it will turn to normal state.
- Systematic over-temperature protection:When the inner circuit is over-heating, which indicates over use of the flash unit, the inner
circuit will shut down power automatically. The flash unit will turn to normal state after the inner circuit is cooled down.
Specifications:
- Guide Number:33 ( ISO 100 )
- Flash Mode: M, S1, S2
- Vertical Rotation Angle :0~90 degrees
- Horizontal Rotation Angle: 0~270 degrees
- Power: 4xAAsize batteries ( Alkaline or Ni-MH are usable )
- Lighting Times: 100-1500 times ( AA alkaline batteries used )
- Recycle Time :approx 0.5-5s ( AA alkaline batteries used )
- Light Quantity Output Control :with 1/8 - stop increment
- Color Temperature: 5600K+200K
- Flash Duration :1/800s~1/2000s
- Dimensions :190*75*55mm
- Net Weight :286g
|
| | |  | This item is 100% Brand New. Never used. It comes with 2 Months Warranty by Seller. The warranty enables the buyer to receive warranty repair or replacement from the term length described in the sale. Situations NOT covered by this warranty include physical damage to the item (dropping/impact damage, water damage, exposure to extreme heat/cold/pressure, etc), misuse, negligence, normal wear and tear, installation of non-factory software, or any other damage caused by use in a reckless or careless manner. The warranty guarantees the item will be free from manufacturer caused defect for the warranty length stated in this sale. Please contact our customer service team to claim your warranty if and when it should be needed. | | |  | - Tax Included! No Cross border brokerage Fee!!
- Will ship to Canada only.
- Within Canada: FREE!
- ONLY ship to PayPal shipping address. (Please make sure your PayPal shipping address is correct before finalizing order and submitting payment. We only ship to the shipping address submitted with the payment!)
- No APO/FPO address, please. No local pick up.
- ***Kindly please leave us positive feedback and 5-star DSR so we can keep selling our products at a LOW price! If you are not satisfied with the transaction, please feel free to contact us and let’s know your suggestion and request, we’ll do whatever we can to meet your demands.
| | |
| | | | | | |  | By bidding on this item, the bidder agrees: - Returns without original box will NOT be accepted . Buyers pay return shipping cost.
- Please make the payment within 7 days after winning the auction.
- All sales are final. Warranty is provided via advertised warranty provider. Seller will assist with replacement only if item is defective within the warranty conditions.
- If an item is received damaged, seller must be notified within 2 business days of this damage. 5%-15% restocking fee will be charged if item is NOT defective or damaged.
- This item will NOT be shipped to Latvia, Slovenia, Lithuania, Nigeria, Indonesia, Singapore, Estonia, Russia, Ukraine, Turkey, Portugal, Bulgaria, Malta, Mexico, Central America, South America or Africa.
- For international orders, delivery time may be up to 20 business days.
- Be sure shipping address with payment is correct. Seller CANNOT change the shipping address after payment.
- *NO EXCEPTIONS!*
|
20121114162841477 |
|
Back to home page
) 
and your full purchase price is covered | See termsfor PayPal coverage- opens in a new window or tab