Tamiya Bullhead / Clod Buster - Brushless ARTR - 4-Link Frame - 4WD 4WS

This is a Tamiya Bullhead (Clod Buster) with original red Bullhead chassis and yellow accessories (bumper, suspension braces etc) and OEM chrome rims. It's much faster than stock: with complete brushless conversion (motors and dual ESCs), and it has also been slightly lengthened (CPE 4-link kit), widened (RC4WD adapters) and raised (1/8th-scale buggy shocks). It has 120A ESCs and 2230kv motors, perfect to run on 4s lipos: I've installed a RC8e battery tray that can hold 2s-6s batteries. It's 4WD and set up for 4WS (4-wheel-steering): with parts included to convert to 2WS if you'd like.

I'm also including all the stock parts I have: original steering assembly, MSC, shocks, ladder bars etc: basically everything you would need to back out the 4link chassis kit. I have 2 C-tree parts trees (one new-in package) which gives you extra ladder bars and body mounts. I've also thrown in an ESP aluminum body post kit that has never been installed: still sealed. To get it moving you'll need radio RX+TX (4-channel recommended (i.e. flashed FlySky GT3B) or 2-channel with servo Y-adapter) and a Deans-connector battery (4s lipo is perfect with a parallel Y adapter to feed both ESCs). Here's what you're getting:

• Tamiya Bullhead / Clod Buster - Brushless 4-Link ARTR with the following:
• Big-bore oil-filled adjustable shocks
• Full ball bearings
• NEW Front axle carriers, just installed
• Two Kimbrough black "heavy-duty / metal-gear" servo savers
• Deans connectors preinstalled
• Crawford Performance Engineering 14" 4-link kit (4L14)
• RC4WD 12mm 1" aluminum widening kit w/barrel nuts (Z-S0376)
• NEW-in-Package ESP aluminum 1.75" body post kit (never installed)
• RCGuy.com "classic" aluminum steering kit - installed for 4WS
• Rear lockout link included, if you just want front steering
• Upgraded battery tray - RC8Be w/velco strap kit
• New 32p steel pinions front+rear, stock ratio
• Just dusted off and cleaned up - ready for you to get dirty! :)
• ESCs: Two HobbyKing 120a brushless, with manual
• Motors: Two Tacon 2230kv brushless sensorless
• Servos: Two CYS S0150 high-torque metal-gear (0.16/60, 15kg)
• Tires: Stock Bullhead on OEM chrome rims
• Extras:
• Two C-tree parts trees: one new-in-package, one with a couple parts used already
• Three bags of OEM parts: MSC, shocks, steering, ladder bars, various electronics mounts, bumpers, wheel adapters, axle braces and more!

This truck is lots of fun and almost bulletproof: but I'm looking into 1/8th-scale nitro so it has to go, please give it a good home. Please note that the blue 4s lipo and FlySky transmitter in the pictures are NOT included, and are only shown so you can see where the battery goes, and to get an idea of how large the truck is. Shipping will be by Canada Post from Toronto, with local pickup offered. I tried to make sure to take a picture of everything, if you don't see it: it's not included unless mentioned above, but if you have any questions, just ask!

Good Luck!