3D Printers & Supplies

10Pcs Extruder Brass Nozzle. This nozzle makes printing with PLA easier. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

6 pcs Original POM Steel Wheel Bearing Pulley for CR-10 10S Ender 3 3D Printer.

Wood filament is a modified PLA based type of filament, that smells and feels like wood. Wood filament for 3D printing is a new FDM (Fused Deposition Modeling) filament that was developed to print wooden-like objects. This filament is comprised of recycled wood combined with PLA filament and some binding polymers. Therefore, printing our wood filament is similar to printing PLA filament. However, our wood filament is slightly less viscous when compared to PLA or ABS filament during printing. Please extrude a little extra wood filament at the beginning of a print to prevent dry extrusion.

(You must have a Bootloader flashed to your Ender 3 Board in order to use this. Support for that is not provided. Pinout from top to bottom: 5v, GND, Signal, the Board also has the labels next to the JST XH connector) Be careful here as if you use a straight through connector it swapped the connections so i had to swap 5v and ground as shown in one of the images.

The installed heatbreak/"throat" is PTFE lined, which is great until you want to print materials which require a higher temperature than the PTFE can handle. We also carry the "volcano" kits to use larger nozzles and extrude faster than is possible with the standard hotend / heater setup.

XS bowden tubing is enhanced with a proprietary blend of high performance additives. Blend of High Performance Additives. ID: 1.95mm ± 0.05mm.

These mounts will fit on the creality cr-10 and hold the e3d v6 hotend. These are cnc machined out of 6061 aluminum and tapped with 6-32 holes. you will receive. 1 complete clamp. 4 total screws.

1 set x T8 anti-backlash spring loaded nut. Aplication: 3D printer Reprap Z axis, CNC, etc. 1 set nut include 2 brass parts and 1 spring. Pitch: approx. Lead: approx. We will try our best to reduce the risk of the custom duties.

(2) FEP film and steel ring installed. (3) Easy to drain resin residual.

Monoprice Delta Mini Buildsheet.

Silicone boot for Wanhao Duplicator 6 and Monoprice Maker. The boot is made using 3D printed mould, so there are visible lines on the surface. To install the boot, disassembly of the heat block is required.

1 x MK2B Heatbed. Suitable for Reprap machine heated circuit boards. Power Input: 12V / 24V. Laminate FR4 1.6±0.15mm. 24V connection: A cable connected 2, another line connected 3 (1 do not connected).

The TL-Smoother is an addon module for 3D printer stepper motor drivers. Type:TL-Smoother addon module. Model: TL-Smoother addon module motor drivers. 1 x TL-Smoother Addon Module. DVR8825 stepper drivers and A4988/2 drivers.