Arduino PLC Processors

You may expect to receive a response to your inquiry within 24 hours. • 5V digital / analog port allows current: 40 mA.

<li> Model Nano V3.0 UPC Does not apply Brand Unbranded MPN Nano V3.0</li>.

<li> Brand MA MPN FT232RL Model FT232RL UPC Does not apply</li>.

NORVI Cema is the most compact version of NORVI series. Two transistor outputs of it adds PWM or Pulse output capabilities. NORVI Arita. NORVI Cema. NORVI IIOT. Intergrated OLED and buttons programmable as HMI.

Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use.

1 x Hunt sensor module KY-033. - 1 x 3-color full-color LED SMD modules KY-009. - 1 x Mini magnetic reed modules KY-021. - 1 x Hit sensor module KY-031. - 1 x Infrared emission sensor module KY-005.

Support ISP download function. Analog I/O Analog input/output: 0~5.

Wear style.

Arduino GND to PN532 Module GND. Arduino 5V to PN532 Module VCC. Arduino SDA to PN532 Module SDA. Arduino SCL to PN532 Module SCL. Two PN532 modules could communicate with each other wirelessly. 1 x PN532 NFC RFID Module.

NEW ADS1115 Module 4 Channel 16 Bit I2C ADC with Pro Gain Amplifier For Arduino. 1 x NEW ADS1115 Module 4 Channel 16 Bit I2C ADC with Pro Gain Amplifier For Arduino. Four single-ended or two differential inputs.

NORVI Arita is a higher capacity version of NORVI Series. Selection five standard models available with a choice two powerful micro-processors. It is compatible with almost every industrial input and output type.

The onboard 4 LEDs show the status of the ESP8266, which are PWR, DFU, AP, STA, and the operation mode is clear at a glance. (unless standard size, such as Nano, Mini). A WiFi module power/service interface is introduced to facilitate developers to extend power and maintenance.

The ADS1115 also. An onboard PGA is available on the ADS1114 and ADS1115 that. (ADS1114 and ADS1115). • PROGRAMMABLE DATA RATE: transferred via an I2C-compatible serial interface; four. features an input multiplexer (MUX) that provides two • PROGRAMMABLE COMPARATOR differential or four single-ended inputs.

I2C expander to the parallel port. Fastest 400kHz I2C bus. SCL/SDA: I2C bus. P00-P17 :Extension I/O port. two IO port extended to 16 IO.

Pin header and cage - brass. Wire range 28AWG ~ 12AWG / 2.5mm square.

Code like arduino, but interactively in Lua script. Greatly speed up your IOT application developing process. Nodejs style network API. Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm 5mm sized MCU in Nodejs style.

• 3.3V digital / analog port allowable current: 50 mA.

So we build this NFC RFID module. This module is built around NXP PN532. NXP PN532 is very popular in NFC area. Arduino GND to PN532 Module GND. Arduino 5V to PN532 Module VCC. Arduino SDA to PN532 Module SDA.

I2C expander to the parallel port. Fastest 400kHz I2C bus. SCL/SDA: I2C bus. Arduino Module. Raspberry Pi. P00-P17 :Extension I/O port. two IO port extended to 16 IO. VCC: DC 2.5V-5V.

It provides tough protection for the Arduino while providing access to all Arduino connectors. It also includes an integrated power switch for the Arduino. Holds the Arduino firmly in place. The case is made of transparent ABS material.

High quality Taiwan DINKLE Fireproof nylon material DIN rail mount carrier, can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use. pin header and cage - brass.

• 3.3V digital / analog port allowable current: 50 mA.

1 x 3-color full-color LED SMD modules KY-009. - 1 x Mini magnetic reed modules KY-021. - 1 x Hit sensor module KY-031. - 1 x Infrared emission sensor module KY-005. - 1 x Temperature sensor module KY-013.

The speeduino board was designed by Josh Stewart of the Speeduino project which makes this one the offical board. Speeduino 0.4.4v PCB board - Full Assembled. This is hardware version 0.4.4v speeduino printed circuit board plus hardware version 3 VR bare printed circuit board.

ONE Arduino boost / 5V 3.3V / / DC / USB.

Trigger Music: 9 songs by Directly. 31 songs by MCU.

It is made by high grade acrylic, which provides excellent protection, with fashion appearance. Made by high grade acrylic. Provides excellent protection, with fashion appearance. We will leave it for everyone that leaves it for us.

Trigger Music: 9 songs by Directly. 31 songs by MCU. We will leave it for everyone that leaves it for us.

Package includes: 1PCS 12V 8--Channel Relay Module with optocoupler for Arduino PIC ARM DSP AVR.

For electronics geeks, we also want to use NFC technology to make our own things. So we build this NFC RFID module. This module is built around NXP PN532. NXP PN532 is very popular in NFC area.

PBTL Mono 60W Digital Amplifier Board. Power amplifier chip: TPA3118. Power amplifier power: 1 60W (one channel, stereo need 2pcs ).

Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. RC522 chip Introduction. Arduino Compatible. Arduino Nano V3.0 MD-328D Micro USB 5V 3.3V Selectable CH340G 16bit AD.

Arduino GND to PN532 Module GND. Arduino 5V to PN532 Module VCC. Arduino SDA to PN532 Module SDA. Arduino SCL to PN532 Module SCL. Two PN532 modules could communicate with each other wirelessly. 1 x PN532 NFC RFID Module.

Support 3.3V, 5V. RXD/TXD transceiver communication indicator. Module size:36mm(length) 17.5mm(width). You may expect to receive a response to your inquiry within 24 hours.

It can also be connected to a bar graph display or 64 separate LEDs. A convenient four-wire serial interface can be connected to all common microprocessors. The MAX7219 also allows the user to choose whether to encode or not encode each data.