CNC, Metalworking & Manufacturing

0.8mm Tin Lead Reel Rosin Core Flux Solder Wire for Electrical Soldering Welding. 0.8mm Tin Lead Reel Rosin Core Flux Solder Wire for Electrical Welding. 1x Roll of soldering wire. Easy to carry and it is sure an electronic enthusiasts essential gadget.

It is the mixture of high-quality alloyed powder and resinic pasty flux, it can avoid the pale yellow residue, so you are easy to clean the board. function：Cooperate with soldering gun to improve welding ef.

<li> 100% New and High Quality <br />Weight:50g <br />Wire diameter: 0.8mm.<br />63/37 rosin core solder.<br />FLUX 2.0%.<br />Good solderability, insulation resistance, No spattering and Non-corrosive.<br />Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others.<br /> INCLUDED : 1 x 0.8mm Solder Wire Reel Brand Unbranded MPN Does not apply UPC 4894462169407</li>.

Material: plastic+solder paste. 1pc x solder paste. Alloy: Sn63/Pb37. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

VDIAGTOOL VC-100 Portable Coating Thickness Gauge Digital Back light LCD Film Thickness Meter Car Paint Thickness Tester VC100 Coating Thickness Gauge Meter Digital Paint Films For Car Paint Tester LCD Backlight Thickness Coating Meter.

Grinding and welding mode can be chosen. Light states: DIN 4. Suitable for all types of the electro-welding: arc welding, gas shielded welding, etc. except laser welding. Mask material: PP. Sensitivity(welding based on current size): adjustable: low/high.

1 x Caliper. Material: Stainless Steel+ABS. Display: LCD display. Easy to read large LCD display. Made of hardened stainless steel. With easy to read large LCD display. Handy conversion chart at the back.

1 x 0.6mm 50G 60/40 Rosin Core Flux 1.2% Tin Lead Soldering Wire. Quick acting flue dissolves surface oxides for good wetting. Flux: 1.2%. High quality soldering wire on the market. Refined welding good fluidity, wetting, smoke spatter.

Handle support interchangeable core, remove protective tube steel sleeve. Pull direct heating core, (note ! 1 x T12 handlex1. Auto Wake-up / manual wake up / wake switch Automatic wake ball a ball switch, to achieve high sensitivity wake (sleep) function, as long as you gently pick up the soldering iron, itautomatically wake heated response, but also the voice prompts very convenient. ).

Capacity: 10ml. 10ml pen applicator with specially designed felt tip. Exhibits improved soldering performance to minimize solder bridges (shorts) during rework operations. Designed for rework of conventional and surface mount circuit board assemblies.

Power : 5VDC (USB) / 8W. Fully Functioning USB powered soldering iron. Type : USB Soldering Iron. Soldering Iron Pen x 1. The Welding head can be replaced easily. LED Indicator : Yes. If leaving the item unused for 25 seconds,the LED light will be turned off and the pen will get into sleeping mode automatically.

Easy Ear Cleaner Wax Removal Swab Ear wax Remover Spiral Soft Ear pick Tool Set. With a small locking thumb screw which locks the jaws in place. 1 x Digital Electronic Caliper Ruler. With easy to read large LCD display.

Joins all aluminum alloys, including those that are not easily joined by high-temperature brazing. 10pcs x Aluminum welding rods. Can be used to gas welding with solder powder,can also be used for argon arc welding.

10Pcs x Welding Rods. Material: Aluminum magnesium. Application: Aluminum and aluminum alloy welding, brazing. Minimize parent material distortion during welding. Length: approx. 450mm/17.7". Excellent corrosion resistance.

Flux: 1.2%. Material: tin lead. Refined welding good fluidity, wetting, smoke spatter. Alloy: SN 60/ PB 40. Good solderability, insulation resistance and non-corrosive. Quick acting flue dissolves surface oxides for good wetting.

Welding output: single pulse. Start mode: pedal or other passive normally open point (must be a normally open point). Trigger form: thyristor special imported optocoupler. Onboard power, status, foot, trigger indicator, working status is clearly visible.

No Need Solder Powder - You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very convenient and easy to weld. Can be used for a variety of heat sources, such as propane, oxy acetylene and so on.

Sharp cutting reasonable matched with high strength of cutter. Blade length: L1=4 6 8 12 12mm. Chatter resistant design for superior surface finishes and long tool life. Arc relief angle makes tool better wear-resistance.

The quality of solder paste, excellent wetting, high reliability. 1PCS Solder paste. Alloy : Sn63/Pb37. Microns : 25-45um.

Safe dye – only high-quality food dye. Layout Fluid from other manufacturers (similar products) have a big brush in the bottle cap and a lower contrast of the marking layer (which leads to a significantly higher product consumption on unit area).

It properly angles the tungsten to grind across the face of the grinding wheel, parallel with the wheel and in line with the grain of the Tungsten. This will avoid causes concentric rings around the grind point, causing a very stable arc.

1x Set (10pcs) 4 Flute Milling Cutter. Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board,the surface is clean, neat, no glitches. Type: Four-Flute Spiral Bit.

Condition is Used but in great condition.

Power: 450W(EU). Suitable for surface soldering and rework, such as SOIC, CHIP, QFP, PLCC, BGA, etc. Special soldering way without touching the solder joint which avoid the parts moving and thermal shock.

1 x Tin Lead Rosin Core Soldering Wire. 1.0mm x 200g. Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others. Material: Tin. Color: Silver. Good solderability, insulation resistance, No spattering and Non-corrosive.

Capacity: 150g. 1 x 150g Paste Flux. IC and PCB are not corrosive. Smooth welding surface. Strong insulation, smooth welding surface. The colors may be a little difference for the different monitor display.

Ideal for being used as holder and positioner in welding, soldering, marking off, pipe installation. 2 x Welding Magnet. Use its different out edges of the magnet to set up materials at 30 and 60 degree.

1 x 6mm Chamfer Mill Cutter. Type : Angle Milling Cutter. More convenient way of protecting the tool can be polished without unloading.

We will try our best to reduce the risk of the custom duties. Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

1 x Electronic Digital Caliper. LCD display size: 40 15 mm / 1.57"" 0.59"" (approx.). Display: LCD screen. Total size: 235 77 15 mm / 9.25"" 3.03"" 0.59"" (approx.). Main Color: Black/Silver.

PB37/SN63 rosin core solder wire. 1 x Tin Lead Soldering Wire. Used in electrical and electronics, solder parts like circuit board, electronics devices etc. Material: SnPb. Good conductivity, thermal conductivity.

Professional Soldering Tool is great for lead-free soldering semiconductors. HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY-60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range 200~450℃.

<li> Type: 100% New CP-2015<br />Length: 2.5 foot (75cm)<br />Width: 2.0 mm<br />Coated with ultra high purity water white rosin flux.<br />Excellent thermal transfer for faster, safer desoldering using lower temperature irons<br />To use: Place the solder wick over the area to be desoldered, apply your hot soldering iron and the solder will be soaked up into the braid, repeat with a fresh area of braid until the joint is free from excess solder.<br />Please note that the length of the wick is 75cm, not 1.5m as printed on the item.</li>

Used to draw radial lines, setting bevels and transferring angles. Double graduation from 0-180 degree. Material: stainless steel. Made of polished stainless steel. Detail Image. Size: approx. 198 x 53 x 14mm/ 7.80 x 2.09 x 0.55".

Model Number: M1-8 HRC50. KVS Features: HRC50 For general steel alloy steel mold steel. Highest cutting hardness: HRC50. 7PCS Nitrogen Coated Straight Shank 4 flutes End Mill set CNC tool 1MM-8MM. 8mm 8mm 20mm 60mm.

Mitutoyo Absolute Digimatic Caliper 0-150mm / 0-6". A digital caliper equipped with standard outside and inside jaws. Scale type Absolute electromagnetic linear encoder. Repeatability - 0.01mm. Accuracy - ±0.02mm / ±0.01".

Note: Deburring Chamfer Only, Drill Bit or Others are Not Included. 1 x Deburring External Chamfer Tool. Simple operation, using the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.

Model: DCMT070204. 10 x DCMT070204 inserts. Insert Grade: YBC251. Mainly used for steel, stainless steel finishing and semi-finishing rough machining. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

Used to high-precision circuit board soldering SMT, BGA soldering processes, etc. No false welding, strong adhesive with solder iron tip. White and plump solder joint. 1pc x solder paste. Alloy: Sn63/Pb37.

1 xsolid Rosin Paste.

Suitable for a 4-Way Chuck Key Large for Drill Presses 1/2" 9/16" 5/8" 11/16". 1 x 4-Way Drill Press Chuck Key. Color: black. Detail Image. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.