Camera Flash Slaves & Trigger Systems

Compatible with YongNuo/ Nikon series flashes. Support remote set the parameters of flash through the transceiver (Remote Control Mode). Compatible cameras/flashes is needed when using TTL function. 1 x YN-622N II transceiver (without manual and other accessories).

This allows shorter sync speeds even with studio flashes or other manual flashes. The new YN-622 fits perfectly in the Yongnuo product line and will be first available for Canon DSLR, probably later for Nikon.

100% Brand new , Never used, Fast  Shipping !   Introduction: The YN-622C-TX transmitter acts as a master control unit to the popular YN-622C ITTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN-622C-TX also enhances stability, as well as improving information transmission speeds.   Note: You should use it with Yongnuo Flash Trigger YN622C transceivers together.     Compatible Camera:  .

Sync Speed: 1 / 8000s . Are you searching for a studio flash trigger to replace your broken or old one?. This studio flash trigger is what you are looking for and can be used as the controller of synchronous trigger studio flash of cameras.

Compatible with YongNuo/ Nikon series flashes. --- TTL mode ( 622 mode ), you can use YN-622N, YN-622N II, YN-622N-TX together. Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465.

Godox first TTL wireless flash trigger X1N applies to Nikon DSLR cameras. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash. X1N is compatible with market-available cameras which support i-TTL.     FEATURES.

The Skyport HS represents a seamless extension of the EL-Skyport family since it is also compatible with the three previous generations of flash units including the EL- Skyport Transceiver RX module for Style RX, Digital RX, and Ranger RX system.

  Description: It is control discreteness for camera to trigger studio flashlight synchronously. The device is composed of two parts, namely signal transmitter and receiver. RT series studio flash trigger is based on a wireless remote system, the transmitter enjoy an advanced electric circuit which is designed with sleepy function, so it has very low power consumption, The receiver is used with alternating current, and it achieves quick response under the advanced MCU control, It can meet the need of sync flash for any different shutter camera     Specification Model RT-16 Channel 16.

Currently, more than 30 popular flash models from Canon, Nikon, Pentax, Olympus, Panasonic, Metz, Nissin, etc. have been profiled and pre-installed on the V6.

Meike MK-910 i-TTL Flash Speedlite HSS Master Flash as Nikon SB-910. 102.00 USD. Meike MK-910 i-TTL HSS Flash Speedlig. Meike FC-100 Macro Ring Flash/Light for Canon EOS 650D 600D 60D 7D 550D 1100D24.90 USD.

RF-602 wireless remote control has both wireless flash trigger and remote shutter release functions by using a pair of RF-600 transmitter/602 receiver and shutter release cord. RF-602 is using FSK 2.4GHz wireless frequency, suitable to use this free channel in many countries; guarantee 8f the transfer speed, distance and stability. It is available to purchase the RF-602RX (RF-602 is combined with transmitter RF-600TX and receiver RF-602RX) for using multi-receivers at the same time, also purchase the 3pins YONGNUO connector to control many types of flash light and camera.  Now YONGNUO is provided all world wide DSLR camera remote plugs..

The Odin II gives photographers more control than they have ever experienced. Control that is direct, logical, and fast. Changes are made by turning a large, perfectly-placed, digital dial. Pick the light.

This RF-603N II Remote Flash Trigger Kit from Yongnuo features two 16 channel, 2.4 GHz transceivers as well as a shutter release cable for remote triggering of Nikon cameras with a 10-Pin connection.

Note: Yongnuo YN622N-TX is meant to be used in combination with Yongnuo Flash Triggers YN622N or YN622N II. Yongnuo YN-622N-TX transmitter acts as a master control unit for the very popular YN622N I-TTL and Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface.

RF-603II Flash trigger with shutter release. 1 x 2.5mm port Shutter release cable ( C1 version ). C1 is used for to CANON 60D/550D/500D/1000D/450D/400D/350D/300D. A creative handle flash light remote control with synchronous trigger.