Camera Lens Hoods

( 1 Pices ).

~Lens Hood EW-63C EW63C For Canon EF-S 18-55mm F/3.5-5.6 IS STM   Description: The Canon EW-63C Lens Hood is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.

Country of Manufacture.Item are manufactured in other country (China, Vietnam etc) if the item is not described "Made in Japan " on the list.

The Ultimate Lens Hood Take Reflection-Free Photos Videos For photographers. - A black silicone cone that will stretch fit to any lens, it is an incredibly versatile bit of kit. - Fit your lens, rather than attaching to the glass.

The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.

This hood fits every lens that has 48mm filter size, especially the lens of Canonet QL17 GIII. A plastic 55mm lens cap that fits the hood will be included.

EF-S 24-105 f/4L IS USM. 1 piece of for Canon EW-83H Lens Hood. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for. This Lens Hood is designed to prevent unwanted stray light from.

    This Lens Hood is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.  .

1x 58mm Petal Flower Lens Hood.

For Leica 12504 Summilux Summicron M 35mm 1:1.4 1:2 Lens. New condition. It can divide to 2 parts and install a Leica series 7 filter inside. Prevent glare by stopping light from coming into the lens at side angles.

Compatible With:Canon EF-S 18-55mm f/3.5-5.6 IS STM. 1 x Lens Hood For Canon EW-63C. The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable.

To Fit Lens Front : 49mm. Lens Cap Snap-On Hood Cover. It can be used with the lens hood for its special design. Olympus OM Lens to Sony NEX Adapter for NEX3/ NEX5/ 5N /5R/NEX6/NEX7/NEXC3. 1 X LENS CAP.

  Features : Brand new and high quality. The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring.

The main function of the lens hood is to shade the lens from stray light, improving your contrast and image quality. 52mm Wide Angle Lens hood 72mm lens cap. Black Thread: 52mm. All the lens with 52mm filter thread.

Introductions:     49mm Standard Metal Lens Hood for Canon Nikon Sony Pentax Lens cap Description: Metal standard Lens Hood is one of the most important accessories for each lens you own. By using this item, you can Improve quality and contrast of your photographs. The item with the black coating is made of high impact metal for long lasting and smooth mounting.   Features: 1. Reduce influence of exceeded lights & Increase transparency and color restore; 2. Assist in keeping moisture and wind-blown debris off lens in inclement weather; 3. Protects front barrel from inevitable impacts against walls door frames obstacles;.

  Description    55mm Metal Wide Angle Lens Hood    Suitable for wide angle lens which accepts a threaded attachment. High Quality!Brand New! For outdoors shooting, this metal lens hood is a must for reducing lense flares from entering photos. In strong light such as sunlight it will shadow the light, which will result in better contrast and overall picture quality.   Screw-mount design, fixed on lens steadily. Made of metal, high qualified with long life for usage.   77mm Snap on Front Lens Cap  .

NIKON AF-S Zoom Nikkor 24-70mm f/2.8G ED. To Fit Lens Front : for Nikon AF-S 24-70mm f/2.8G ED lens. The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable.

NIKON AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens. This lens hood is ONLY compatible with AF-P 18-55mm Lens with 55mm filter thread. LH-N106 Lens hood is specific for NIKON lens. LH-N106 replaces NIKON HB-N106 Lens Hood.

1 x 58MM Tulip Petal Flower Lens Hood. This lens hood can be used with lenses of different focal lengths, its tulip shape is designed to prevent vignetting while still blocking unwanted light from entering your lens.

Compatible with Canon EF 50mm f/1.8 STM 49mm Lens. 1 piece of ES-68 II Lens Hood. It shades the lens from stray light, improving your contrast and image quality. USB Flash Drives. Smart Phone Accessories.

AF 50mm f/1.8D Nikon AF 50mm f/1.4D. Canon EF 50mm f/1.8D. Canon EF 50mm f/1.8D II. Nikon AF 50mm f/1.4D. Nikon AF 50mm f/1.8D. Thread : 52mm. All lens with 52mm front thread. Canon EF 40mm f/2.8 STM.

Canon EF 85mm f/1.8 USM. Canon EF 100mm f/2 USM. Canon EF 70-210mm f/3.5-4.5 USM. Canon EF 100-300mm f/4.5-5.6 USM. Canon EF 135mm f/2.8 Soft focus. Hood Type: ET65III.

EW-83J Lens Hood for Canon EF 17-55mm f/2.8 IS USM. Canon EF-S 17-55mm f/2.8 IS USM. An essential piece of kit for owners of this lens. 1 x EW-83J Lens Hood. Suitable for.

It is manufactured as similiar to the original Rolleiflex ones. The Hood is suitable for Rolleiflex 3.5C, Rolleiflex 3.5E and Rolleiflex 3.5F. Be Aware that Rolleicord Serial TLR and Rolleiflex MX are Not suitable for this cap.

  Product Description 1. Light and portable, easy to install; 2. Designed with no dark corners and can be reversibly installed; spray little dots on surface. Main Parameters: 1. Product type: camera hood 2. Model: HB-N106 3. Applicable models:Nikon D3300 AF-P DX  4.

For: all lens with 77mm filter thread (standard focal length lens). Rear filter thread(towards lens front): 77mm. Lens hood-. Front thread(can be screw-in filters): 82mm. Height(not included the screw part): 21.5mm.

Description  High-qualiy and new brand  Can be attached to 39mm lens or fiter thread  Made of aluminum , suitable for wide angle lens  Lower the contrast of the image,enables you to shoot towards the light source, and being reflected inside the lens, without excessive flare Stops light coming into the lens at extreme angles and being reflected inside the lens Can be used with a filter and a snap-on lens cap while many lens hood didn't have such function.

To Fit Lens Front : 72mm. Lens Cap Snap-On Hood Cover. It can be used with the lens hood for its special design. Olympus OM Lens to Sony NEX Adapter for NEX3/ NEX5/ 5N /5R/NEX6/NEX7/NEXC3. 1 X LENS CAP.

Commodity Introduction:  The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring. The design makes it firmly on the lens. NOTE: you may couldn't fix the lens cap when you use the lens hood. Compatibility: Canon EF 50mm f/1.8 II lens Package Contents: lens hood X 1 Colour black To Fit for Canon EOS EF 50mm f/1.8 II Countr.

Nikon AF 24mm f/2.8D. Nikon 24mm f/2.8. Nikon 70-210mm f/4.5-5.6. Nikon 28mm f/2.

Dear: :-) Please note：you do not have to pay extra freight, we can not provide tracking code, we can only through the envelope sent to you. if your address more remote, or if your address does not often receive international cargo record. we recommend that you choose a standard international shipping (you need to pay an extra $ 2, we will provide a tracking number to you) This is an article of insurance, because you can check the status of your cargo transport.      .

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. 1 x Lens Hood. Apply to EF-S 55-250mm f4-5.6 IS. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

  Introduction: ( Third Party Designed ) The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring. The design makes it firmly on the lens. Bayonet mount design. Hood Type: HB-69 Hood Material: Plastic Hood Color: Black as Photo Compatible With: Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.

Description :   Fit All Lens with Filter Thread There is a durable metal filter thread on this hood. To install it, simply screw it on your lens. Fit all lens with filter thread from Nikon Canon Sigma Tamron Sony Minolta Olympus. With the front filter thread, you can still use other filters along with this hood.   One hood for different lens Just need to carry one hood for different lens of the same filter size.   Collapsible & Adjustable Hood Length.

  Features : Brand new and high quality. The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring.

Infomation JJC LH-JX20B compatible with FUJIFILM. It works with:Fujifilm Finepix X10,X20. LH-X10 Lens Hood.

Specification: 100% brand new with high quality Material: Plastic Height: Approx.3.6cm Type: Lens Hoods Hood type: ES-68 II Quantity: 1Pc Fitment: For Canon EF 50mm f/1.8 STM Prevent glare and lens flare caused by unwanted light In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring The design makes it firmly on the lens   .

All lens with 52mm front thread. The main function of the lens hood is to shade the lens from stray light, improving your contrast and image quality. ● It will lock on to the lens or adaptor directly with ascrew-in type.