Cedar Architectural & Garden Antiques

This is a Torx Drive with an extended button at the base of the drive. FastenMaster Trio Deck Screw. Designed to outperform standard deck screws in softwood decking such as pressure treated, cedar, and redwood.

This is a Torx Drive with an extended button at the base of the drive. FastenMaster Trio Deck Screw. Designed to outperform standard deck screws in softwood decking such as pressure treated, cedar, and redwood.

This is a Torx Drive with an extended button at the base of the drive. FastenMaster Trio Deck Screw. Designed to outperform standard deck screws in softwood decking such as pressure treated, cedar, and redwood.

I recently moved them to Sebring Florida.I had stayed at an 1840's Greek Revival Key West Bed and breakfast with similar doors, I believe they were used 1840-1880's, but appreciate any advice to date them.

All wood with traditional style. We hope you accept our fair deal.

Measurements: 16" tall, 3 3/4" diameter inside diameter opening. One set screw works, one is twisted off, and the third has an extractor drill bit broke off in it. I used standard hammer to remove it from rest of unit, after failing to turn the 2 bolts/screws. Buyer may be able to use same technique to mount on his/her unit and use remaining functional set screw to secure it. Or try to remove the two stuck ones.

Measurements: 16.25" tall, 3.75" diameter opening. 2 set screws work, 1 twisted off.

This 4 blade wooden propeller is assembled from a mahogany hub and Cedar blades . These woods are utilized in the boating industry for their resistance to moisture.Your propeller will come with a 1/8" hole that can be enlarged if necessary but it usually will thread onto the original shaft as is and measures 13" across. The propeller comes with a primer coat of White spray paint and can be painted by yourself in any pattern or color you wish. Different sizes available by request

This pair of rustic wall sconces is handcrafted from weathered cedar wood. Depth: ~ 4".

Between each balusters. Typically these balusters were placed right next to each other. This is where you can see what balusters I currently have available. This 8 ft. rail section is designed to hold 17 of my 5.5" wide balusters.

Great Woodworking piece. Let your imagination run wild. We will never send you a wet piece of wood. May have normal cracks. small rot out spots as any piece of cedar wood, but very solid overall. I cut the back edge as seen in pictures, so it would fit flush against the wall.

Early 1800s Hand Hewn Logs cut to perfection for Mantel Fire place.

These were bought new for a construction but not used. Perfect condition!

Have a Problem?. 100% Manufactures Warranty.