Consumer Electronics Mixed Lots

NEW, ORIGINAL parts. Best price, Good quality. Yes ,we do. us and we will give you a better price. Most Country of.

Brand new and high quality Light weight, thin profile and easy handling insulate grips comfortable for operation ,convenient to use Special suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on Used in electronic industry repair, jewelry processing, model making and fishing, etc Material: Stainless steel jaw, Anti-slip rubber handle Color:blue, as picture shows Length: 125mm.

Features: • Metal panel mounting plastic/metal 2.1mmx5.5mm DC socket • 2 terminal type-positive & negative • Fitting hole of 7.8mm required. • Complete with rear fixing locking nut. • It will take 3.2mm push on connectors or solder fit. • Requires total clearance behind panel of 13mm Specifications: • Contact rating: MAX 3A 12V DC • Connector size: 2.1mm x 5.5mm x 9mm • Product size: 10mm x 10mm x18mm • Max panel depth: 3mm.

Product Description Description Remote control 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 433MHZ 6.Transmission distance :50-100M (Open field, the receiver sensitivity of -100dbm) 7.Encoder types: fixed code With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: 6.6*22*41mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press.

Description: A. 1 terminal Strip, tie-point 300. B. 2 Distribution Strips, tie-point 100. C. ABS plastic material. D. Wire size: Suitabe for 29-20 AWG wires. E. Size: 8.3 x 5.5 x 0.85 cm. F. Transparent Material.

Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A. Easy to install and maintain. Input Current: Max 3A. Make sure resistance values, diode models and installation direction are correct.

Description: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. This latest revision corrects the silk error from the.

Circuit boards. A Wide Range of Materials can be engraved, including. United Kingdom. Best price, Good quality. Other country. Italy ,Russia.

Best price, Good quality. NEW, ORIGINAL parts. NSC, TI/BB, INTERSIL, XILINX. and so on. Especially in Hard To Find Parts. us and we will give you a better price. Transistors, and so on. You may also like.

Feature Good wettability, conductivity, thermal conductivity, easy to climb on the tin. Uniform flux distribution, no broken flux core from tin. No knot in winding, climb tin with good speed and few residues. Good for electric and technology. Specification Color:silver Diameter:0.6mm Weight:About 50g Material:tin 60sn 40pb Flux:1.2%.

Model Name: Adjustable DC-DC step-down module Input Voltage: 4.5V ~ 28V Output voltage: 0.8V ~ 20V Output Current: 3A (Max) Conversion efficiency: 96% (maximum) Output Ripple: <30mV.

Features: Glasses Type 20X Watch Repair Magnifier with LED Light. It is very inconvenient to use traditional clock magnifiers which need to be clamped by eyelid and may affect the repair quality of precision instruments and clocks. This LED Watch Repair Magnifier is constructed with metal glasses frame and plastic magnifier casing. Specially designed Glasses Watch Repair Magnifier can solve this problem to make it easier and more accurate to repair precision instruments and clocks. LED light with ON/OFF switch and it is powered by 2 x CR1620 button batteries.锛圢ot include锛? Angle of the LED light is adjustable. This 20X Magnifier is great for watch and clock repair. Specifications: Multiple: 20X Weight: 70g Package Weight: 81g.

Internal 1000 Ohm half-bridge strain gauge load cell, range is 50kg, half-bridge structure. Best price, Good quality. NEW, ORIGINAL parts. Size: 34mmX34mm. NSC, TI/BB, INTERSIL, XILINX. and so on.

Arduino rotary encoder module KY-040. Circle pulse count: 20. NEW, ORIGINAL parts. NSC, TI/BB, INTERSIL, XILINX. and so on. Especially in Hard To Find Parts. us and we will give you a better price.

Product Description Description Note: The color of the item may vary slightly due to photography and your own computer Feature: The full-bridge structure, the four leads, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly. Wiring: red voltage + E, black line voltage -E, green line signals + S, the white line signal -S The sensor is fixed at one end through the screw hole, and the other end left floating state, applied according to label directions direction of gravity. In particular, note that you must not directly push the white plastic cover part, in order to avoid damage of the sensor. Specification: Model: YZC-131A Dimensions: 75x12.7x8mm/2.95 x 0.51 x 0.31"(L x W x H) Range: 5 kg Rated Load: 2 kg Rated output: 1.0 ± 0.1mV / V Nonlinear.

Working range: 0.3-6L/min. Black - GND - Connect negative. Red - In - Connect positive. With stainless steel ball inside of the impeller, wear-proof. Size (L x W x H): Approx. Water pressure:≤0.8MPa.

Product Description Features 1.Location number 20 2.Pulse numble 20 3. Operating life 30000 times.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching.

NA219 can be achieved within the maximum error accuracy 85C temperature range from -40C to + 1% . NEW, ORIGINAL parts. us and we will give you a better price. Best price, Good quality. West Asia/Middle East.

Wireless Standard:802.11b/g/n Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M) Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM Operating Voltage:3.0-3.6V(We recommended 3.3V) Operating Current:Average 80mA Operating Temperature:-40~125℃ Wireless Network Mode:station/softAP/SoftAP+station Safety Mode:WPA/WPA2 Encryption Type:WEP/TKIP/AES Network Protocol:IPV4,TCP/UDP/HTTP/FTP.

CF210SP is a new type of radio FM, AM two band radio, the FM band using the CD9088 chip, which uses patch element SMT package, the receive frequency range of 76-108HMZ, not only to accept the FM radio, can also receive campus radio and part of the audio signal of the television stations; AM band using direct IC the TA7642, receive frequency range is 525-1605KHZ circuit is simple, assembly success rate, a better selectivity having a little;. amplifier circuit using TD2822 special function ICs having loud. Sound quality is good. Circuit works 1. Frequency Modulation (FM) section CD9088 is a dedicated single-chip FM radio chip, Its simple external circuit, the circuit was built frequently 70KHZ phase locked loop system, selectively implemented by active RC filter, mute circuit can be sup.

It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the banana pi Image. It uses the All Winner H3 SoC, and has 512MB DDR3 SDRAM. What’s Orange Pi One？.

NEW, ORIGINAL parts. NSC, TI/BB, INTERSIL, XILINX. and so on. Especially in Hard To Find Parts. Best price, Good quality. us and we will give you a better price. Transistors, and so on. East/South Asia.

Features: Brand new and high quality. Connection function, it cannot improve its signal Mainly used in HDMI Realplayer to HDTV Signal transmission, and cannot support PC HDMI to HDTV NOTE: This product is only for connecting HDMI game player (NOT PC, DVD, set-top boxes)to TV. It can just for signal transmission, not for signal conversion. Please check whether your device has got signal conversion function before you buy. If not, our product may not applicable to your device. Specifications: length: 1005mm Color: Black.

Description: Features: For rewiring vintage pedals or effect boxes For Electro-Harmonix, T Rex,Retro FX, Radial Bigshot,ect effects pedals For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain The 9-lug switch can be used to rewire vintage pedals or effect boxes, for unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain The third pole can be wired to control an LED status light or other custom function There are a total of nine lugs on each switch,three per pole At least 7/8\" depth and 1/2\"-diameter mounting hole are required The threaded portion is 7/16\" tall Hex nuts, lock washer, flat washer inculded Specificatio.

8Pcs With case. The Hollow needles made of stainless steel, it is not sticking, use the pinhole penetration component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.

WE PROMISE YOU CAN GET THE ITEMS YOU PAID OR REFUND. To USA: Send by e-package. To other countries: Order more than $25, provide free tracking number. Order less than $25,customer can pay $3 to get a tracking number. We located in the biggest electronic market in China--HQB(Shenzhen) ,Specialist in ICs over 10 years, we seek to establish long-term business relationships. Real store with large stock ICs, 100% as describe. Best price, Good quality. Can get almost everything at the lowest price *HIT ALL PRICE,14 days NO-QUESTION- RETURN.

Features: Details about Self-locking type: Output data to achieve the trigger flip state. Successfully received the data can have been Maintain the state of the corresponding level. Remote data changes until the next time change. Each self-locking independent of each other, can remote control multi-channel, such as lighting control. THE item don't have diagram and manual, please see all the detail below. The remote control for anti-theft alarm, remote control electric windows, signal control, industrial control, lifting equipment, Electrical control circuit, etc. Remote control switch module relay contact Independent output, Very suitable for direct control of various types of load; Wireless remote control with fixed code coding technology, No direction, switches without disturbing.

Main features ● Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC. ● IC control circuit and a power LED spot light utility. ● Control circuit chip with RGB components in a package in 5050, to form a complete external control pixels. ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● Built-in power-on reset and brown-out reset circuit. ● trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz / s. ● serial cascade interface, through a signal line to complete the receiving and decoding of data. ● transfer transmission di.

Single H-Bridge output current:1.5A(It can drive two DC motor). Short circuit protection:YES. DC motor which drive current is less then 1.5A. Best price, Good quality. East/South Asia. NEW, ORIGINAL parts.

Product Description Features: 100% Brand new and high quality Compact, lightweight, and durable DIY your own USB adapter, no other tool needed, very funny Very easy to use Micro USB 5 Pin T port male standard connector for computer use, with black plastic Shell Specifications: Connector Type: Micro USB 5 Pin T Port Male Cover color: Black Total Dimension: approx. 21mm*11mm*7mm.

Light color: warm yellow light. Other country. Italy ,Russia.

Wireless digital identification technology, each switch has independently password, do not interfere with each other. Provide passive switch: NO is normally open port, COM is common port, equivalent to on and off, and when the relay is energized, NO and COM connected.

P2102 BAITE USB 2.0 to UART TTL 6PIN Module Serial Converter Arduino Projects Robots NEW •This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer! •Stable and reliable chipset CP2102 •USB specification 2.0 compliant with full-speed 12Mbps. •Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V. •All handshaking and modem interface signals. •Baud rates: 300 bps to 1.5 Mbps. •Byte receive buffer; 640 byte transmit buffer. •Hardware or X-On/X-Off handshaking supported. •Event character support Line break transmission. •USB suspend states supported via SUSPEND pins. •Temperature Range: -40 to +85. •Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40. Specifications: Built-in USB to.

Back SSOP14 Distance of pin: 0.65mm. Front SOP14 Distance of pin: 1.27mm. PCB Size：17.7x17.7x1.5. DIP Distance of pin: 2.54mm. Transistors, and so on. Especially in Hard To Find Parts. United Kingdom.

Two Audio Input A/B to One Audio Output.User can select A or B to output by button. One Audio Input to two Audio Output A/B. User can select A or B to Iutput by button. Button switch output/input model.

Product Description Features: ISP interface: 10 needle, 6 needle Size: 28.8 x 61.6 mm Power supply options: external power supply and USB power NOTE:(If using external power supply - please remove the USB power jumper first).

Module based on: NE555 chip. Main Chip (NE555) Characteristics This is a 12V Conduction delay relay module. 10A, DC 0~30V / max. Delay modue:delay connect module. Simple circuit design. - The output can be connected to AC 250V 10A DC 30V 10A.

The Computer CPU PC Cooling Fan keep your computer cool with optimal temperature Improve air flow. Cooling your CPU when they are used, make your PC more durable. Unique fan design for easy thermal heat dissipation, low noise.

Description: 1. Immersion Gold PCB, machine welding process to ensure quality. 2. Name: HMC5883L module (three-axis magnetic field module). 3. Use the chip: HMC5883L. 4. Power supply :3-5v. 5. Communication modes: standard IIC communication protocol. 6. Measuring range: ± 1.3-8 Gauss. WE PROMISE YOU CAN GET THE ITEMS YOU PAID OR REFUND.

This cable is compatible with the device with Micro USB port. With ON/OFF button control switch can control power easily. High quality copper wire inside. Simply plug and charge. Convenient power Sources. Design for transfer power: 5V / 1A-2.5A Length: 1.5M/5FT Connector: Micro USB B type to USB A type Color: Black Fast and stable supply power to your device such as Rashberry Pi, Tablet PC, BlackBerry, Android, Samsung, Sony, Nokia Phones. Product Packing:1 X 1.5 M / 5 FT Micro USB to USB Cable with ON/OFF button switch Posted with eBay Mobile.

Description: 1. Working voltage:DC 5V 2. Output power:3W+3W 3. Speaker type:3W*2 4-8ohm 4. Mounting Hole:3.0mm Feature: Mini design, sound loud and clear, strong sense of hierarchy, ultra-small size, simple installation, wide application range, low prices, quality and stability.

9, the module weight: 4g. 10, module size: 25mm 15mm 13mm. You may also like. 7, with a fixed mounting holes for easy fixed installation. 6, the output mode: SPI digital signal.