Enterprise Networking & Servers

Dell P/N: 0G176J compatible with KG7NR G281D.

2.5" to 3.5" SATA SSD HDD Adapter. This adapter can adapts any 2.5" form factor SATA SSD (or hard drive) to any 3.5" form factor drive tray, without cables or hassles. Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.

Part Number 047MCV /00RR9J/0U039M. Interface SAS, SATA, Two internal miniSAS connectors. Dell C2100 and other DELL servers. real pictures listed. support RAID0,1,10,1E and JBOD.

Connector Type SMA Plug connector. Cable Length 3m /9.84ft. Mounting Magnetic. Cable Type RG174. Raspberry Pi. Frequency Range(MHz) 433 /-15.

DSLRKIT PMID6P2U Passive PoE Injector Switch. DSLRKIT PMID6P2U 8pots 6PoE Passive PoE switch x1. 802.3af (802.3at Type 1) PoE device, We suggest DC 44V-57V power adapter. 802.3at Type 2 PoE (plus) device, We suggest DC50V-57V power adapter.

4x 1GbE RJ-45 Ports. 24x 10Gbe SFP Ports. Condition - New In Box From Quanta. Add Hard Drives SSD Add Network Cards Raid Add Networking Cables Add Network Switches.

It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. It supports most of the LCD panel from 12.1" to 55" with a LVDS interface and a resolution lower than 2048X1152, plug&play kit, no need soldering.

Passive PoE Injector Switch / PoE Power Swith. New Version " 8 2 Ports 8 PoE Injector Power Over Ethernet Switch without Power Adapter 250M ". If your device does not support poe,need to add a passive poe splitter cable!

SG105 is nice and small and won't take up much desk or floor space. With desktop or wall-mounting design design, you can put SG105 anywhere as you want and move flexibly. It will fit equally well in any desktop decor.

State indicator: power, connection / activity indicator. Included: 1 x Network Switch. It can effectively extend the range of IPC and AP. Product type: POE switch. Due to the different display and different light, the picture may not show the actual color of the item.

It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. It supports most of the LCD panel from 12.1" to 55" with a LVDS interface and a resolution lower than 2048X1152, plug&play kit, no need soldering.

Integrated RAID (IR):NO- RAID. PCI Data Burst Transfer Rates:X8, PCIe 4000 MB/s. PCI Card Type:3.3 V Add-in Card. PCI Power (Nominal):7 W typical (Airflow min 200 LFM. Storage Connectivity; Data Transfer Rates 8 ports; 6Gb/s SAS 2.0 compliant. ).

It will be a surprise that your bare LCD will be of good use, and no longer be a waste. It supports most of the LCD panel from 12.1" to 19" with a LVDS interface and a resolution lower than 1440 900, plug&play kit, no need soldering.

Support TTL signal output. AT070TN94, etc., universal 50PIN interface TTL LCD screen. Relative humidity: 80%. Do not disassemble the module. Our goal is. Can support We will be responsible for. Can’t be pressed and distorted.

The 5 port desktop Giga Ethernet switch provides non-blocking, wire speed switching for your 10, 100/1000 negabit network. 1Pc x Ethernet Network Desktop Switch. Every port has independent bandwidth.

Stepcode - SLBV8. Socket - LGA1366. Cache - 12MB.

1 x IBM 46M0997 Raid Card. arrived at our warehouse. We are convinced you will.

Solution Provided: Low-cost, green SATA SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives. - Eight internal 6GB/s SATA SAS ports.

2x Mini Ethernet Network Desktop Swi. 1 Piece 8 Ports Ethernet Switch. - Uedia interface: 10Base-T: 3,4, or 5 unshielded twisted pair; 100Base-TX: 5 unshielded twisted pair; 1000Base-T: 6 unshielded twisted pair.

DSLRKIT MID4P1 U Passive PoE Injector Switch. 802.3af (802.3at Type 1) PoE device, We suggest DC 48V power adapter. 802.3at Type 2 PoE (plus) device, We suggest DC52V power adapter. Then select the 96Watt (48V2A) power adapter is enough.

Kit for LTN154X3-L01 TV HDMI VGA USB. Board ports: HDMI, TV(IEC) ,AV,USB, VGA, PC audio. turn a unused LCD panel into a desktop/PC. HDMI : 1080P max, decode Range 480i, 480p, 576i, 576p, 720p, 1080i, 1080p.

1 x DELL PERC H700 /W 512M. Including battery and battery cable. 1 x Battery(Original ).

It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. It supports most of the LCD panel from 12.1" to 55" with a LVDS interface and a resolution lower than 2048X1152, plug&play kit, no need soldering.