Furuno Fish Finders and Depth Sounders

Furuno 582L removed during an electronics upgrade. In very good condition. Screen is bright, ports are clean. Unit was flush mounted. Pictures are actual unit.

You are looking at a used but fully functional Furuno NavNet 3D Power Supply for NavNet 3D and TzTouch The PSU012 Power Supply is required for DRS4A and DRS6A with MFD8, DRS12A with MFD8 or MFD12. The PSU012 Power Supply is required for DRS2D, DRS4D, DRS4A, DRS6A and DRS12A with TZT9 or TZT14. This unit was permanently installed on our boat before being replace so the wiring may need to be fashioned to meet your needs. Pounds: 10.00 Ounces: 0.00 Package Depth: 10.00 Inches Package Length: 10.00 Inches Package Width: 16.00 Inches

Want large boat sounder capabilities on your boat?. Then look no further than Furuno's color TFT LCD FCV600L. You may choose LF (50kHz), HF (200kHz) or both at the touch of a key and obtain detailed fish and bottom discrimination using range scales of up to 3000 feet.

I am listing this for a friend who is a commercial fisherman. He pulled this off a boat he is refurbishing. There is no reason to think that it doesn't work but since I am unable to test it it is bieng sold as is for parts. It comes with it's original manual. You will be getting the equipment in the listing photos.

Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin). Bronze Thru-Hull with Temperature. Temperature: Yes. Speed Included: No. Frequency: 50/200. Mounting Style: Thru-Hull.

Auctiva gets you noticed!

The bronze B60-20° provide a vertical beam without a fairing. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. 20° titled version is designed for 16° - 24° deadrise angles.

Furuno's DFF1 is a network sounder featuring Furuno Digital Filter (FDF) Technology designed for use with the NavNet series. This digital Network Sounder can turn any NavNet display into a powerful, dual-frequency digital fish finder.

Good used BBFF1 Navnet fishfinder module.

Powerful technology in a compact 9" Chartplotter with a built-in CHIRP Fishfinder! Coverage of the Pacific coast starts at Point Conception, CA and runs down to Bahia Cupica, Colombia. Coverage of the United States starts in Cumberland Sound, GA and runs down around Florida and over to Brownsville, TX.

Furuno front cover f/ fcv585 fcv-585. Screen Size NONE. Frequency NONE. Resolution (VxH) NONE. Included Transducer NONE. Speed/Temp NONE.

New to the market are the B150M and TM150M, economical Chirp transducers designed for offshore fishing and freshwater anglers. Available in plastic transom-mount with transom bracket and hardware and with a custom transom housing and cover (TM150M).

600W Transom Mount Transducer Features: 600 Watts 50/200 kHz 45/11 degree Beam Angles Plastic Transom Mount with Temperature and Removable Speed Assembly 30 Foot Cable with 10-Pin Connector Product : FURUNO 525STID-PWD TEMP, DEPTH AND SPEED TRANSOM MOUNT Manufacturer : FURUNO Manufacturer Part No : 525STID-PWD UPC : 611679310446.

Furuno ETR-6/10 (BBFF1) Depth Sounder module. Depth Sounder Module. and not included. Monitor was used during testing. Navnet Network cable. (New) Power cable.

Unit has been tested and is fully functional with a clear crisp CRT. All buttons/knobs work.This is 150% working and test shots are of THIS unit in operation. Unit only in great condition. No transducer or cables included.

Furuno FCV628 5.7" Color Fishfinder Model: FCV628. With the FCV628’s Fish Alarm function, when fish echoes appear in an area preset by the user, the FCV628 will sound a loud alarm and display an alarm Icomn on-screen.

Open box, never been used.

The nearly flush housing minimizes drag with only 5 mm (3/16 ) extending outside of the hull. You may also be interested in.

Furuno Network Sounder ETR 6/10 for Navnet VX1 VX2 etc. MODULE CABLES. This ETR 6/10 has been tested on our bench with a Navnet VX1 Display and transducer and found to be perfectly operationally. Display not included.

Front Display Cover f/FCV-585 & FCV588. UPC Code: 611679316097.

This Furuno transducer is often used with the booster box on the FCV-1200BB system. It is a 50khz transducer, 5kw maximum output power. This was tank mounted in a SeaVee boat that was refit with Garmin electronics and went chirp.

It was removed from a working system for an upgrade and has been fully tested and is working perfectly. 1 - Furuno ETR-6/10N Sounder Module Navnet. Navnet Sounder Module. All other options automatically open a case against us.

This ETR 6/10 has been tested on our bench with a Navnet VX1 Display and transducer and found to be perfectly operationally. Display not included. The internal jumper has been set to its factory default for 600 watt transducers, if you have a 1kw transducer, instructions to change the jumper are in the manual that is on Furuno's website, just google ETR 6/10.

Furuno FCV588 8.4" Color Fishfinder Model: FCV588. With the FCV588’s Fish Alarm function, when fish echoes appear in an area preset by the user, the FCV588 will sound a loud alarm and display an alarm Icomn on-screen.

Rubber Coated Transducer, 1kW (No Plug). Rubber Coated - Chest, Housing or Tank Mounted. Speed Included: No. Temperature: No. Fairing Block Included: No. Frequency: 50. May be used for 75 kHz frequency setting feature, available only in FCV1100/1200 and FCV1200BB.

Furuno ETR-6/10N transceiver unit is in good condition.  Item runs on frequency 50 Hz/200 Hz  network sounder. Seller will not accept or pay for international returns.

POWER UNIT to VALVE CABLE ASSEMBLY. Power unit to Valve cable. in Morehead City North Carolina. RUSTY RONS MARINE SURPLUS.

Marine Professional 50/200 kHz 15" Color Video Sounder FishFinder. Manufacturer: Furuno. High performance, dual-frequency sounder. Ram card storage of customized sounder settings. With the optional connector assembly (000-117-603), you can transfer sounder data to a compatible radar.

Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector Product : FURUNO 525T-PWD TM W/ TEMP 50/200KHZ (10PIN) Manufacturer : FURUNO Manufacturer Part No : 525T-PWD UPC : 611679275967.

Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin). Plastic Transom Mount with Temperature. Speed Included: No. Frequency: 50/200. Mounting Style: Transom.

Bronze Thru-Hull Transducer, 600w (10-Pin). Bronze Thru-Hull. Speed Included: No. Frequency: 50/200. Mounting Style: Thru-Hull.

The nearly flush housing minimizes drag with only 5 mm (3/16 ) extending outside of the hull. You may also be interested in.

P79 Plastic In-Hull Transducer, 600w (10-Pin). Plastic In-Hull Mount for Shoot-Through Applications. 45/15 degree Beam Angles. Temperature: No. Speed Included: No. Frequency: 50/200. Mounting Style: In-Hull.

Furuno 525STID-MSD Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin). Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin). High-Speed Fairing Block Included. Fairing Block Included: Yes.

P79 Plastic In-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Plastic In-Hull Mount for Shoot-Through Applications 30 Foot Cable with 10-Pin Connector Product : FURUNO 520-IHD ADJ IN HULL F/ 6000-600L-582L-16&1850DF Manufacturer : FURUNO Manufacturer Part No : 520-IHD UPC : 611679220240.

Removed in excellent working condition. We have tested it on a live setup and found it to be 100% operational. Display used for testing is not included. An extension must be requested in writing and approved by Max Marine Electronics.

This is a used sounder module removed from a boat during an upgrade. It was working correctly when it was removed. It was working with an RDP-139 Display.

Plastic Transom Mount Transducer, 600w (10-Pin). Plastic Transom Mount w/bracket. Speed Included: No. Frequency: 50/200. Mounting Style: Transom.

Includes everything seen in picture. I believe this is new but I don't know for sure. The power cable appears to be unused. It was sitting in my aunts garage for at least 10 years since. They no longer have their boat.

The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.

Furuno Thru-Hull Multibeam Transducer f/DDF3D. Thru-Hull Multibeam Transducer f/DDF3D. Manufacturer: Furuno. The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world.

We are located in one of the largest pleasure boating areas in the United States. source of most of our inventory. Combined boating experience of over 100 years. One of us will probably know what you are talking about.

This BT-5 box is used to run a 5kw transducer on the FCV-1200 system. This service takes an average of 2 weeks, but may take longer. An extension must be requested in writing and approved by Max Marine Electronics.

Step up to a 1kW Without a Fairing! The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. 0 degree tilted version.