General Purpose Relays

Product Name : Power Relay;Model : SRD-05VDC-SL-C Coil Voltage : DC 5V;Load Capacity : 10A 250VAC/125VAC/30VDC/28VDC Size (Approx.) : 1.8 x 1.5 x 1.4cm/0.7" x 0.59" x 0.55"(L*W*T) Material : Plastic, Metal Color : Blue;Weight : 87g 5 Pin SPDT, PCB plug-in type power relay. Suitable for domestic appliance, office machine, audio, equipment, automobile, etc. The relay plays the role as a protector or a circuit switch. It can protect your electric equipments very well. Package Content : 10 x Power Relay Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm. MPN Does not apply Brand Unbranded UPC 190268264488 EAN 19026.

12V DC mini power relay 6 pin Contact load: Micro Power DC Resistance: 1Ω Operating Current: 1A Switching Voltage/ current: 1V/ 1A Pin Length: approx. 3 mm Size (L x W x H): approx. 0.6 x 0.4 x 0.45 inches/ 1.5 x 1 x 1.1 cm Color: black Material: hard plastic Package Contents: 10 x mini power relay Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm. MPN Does not apply Brand Unbranded UPC 4894462158203 EAN 4894462158203 ISBN 4894462158203 UPC 4894462158203 EAN 4894462158203 ISBN 4894462158203.

Single Phase Solid State Relay with LED indicator. It is a must component for temperature controller, heater, small oven and more. Brand Unbranded MPN Does not apply UPC 4894462484180 EAN 4894462484180 ISBN 4894462484180 Designer/Brand Unbranded UPC 4894462484180 EAN 4894462484180 ISBN 4894462484180.

3: output capacity: DC DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary. DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support. Module Highlights.

8Pins DPDT type PCB mount. This relay can adjust current automatically, transform and protect the circuit. It can be used in remote control, electronic equipment, automatic control system, communication equipment and so on. Weight: 50g(5pcs) Size: 2 x 0.9 x 1.5 cm Contact capacity: 1A 125V AC, 2A 30V DC Package included: 5 x HK19F power relays Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /-1-3cm. Brand Unbranded MPN Does not apply UPC 190268183321 EAN 190268183321 ISBN 190268183321 Designer/Brand Unbranded Designer/Brand Unbranded.

Brand new and high quality!The automotive relay is real practical and economic, it is absolutely worth it to have one!Automotive relays normally open relay switch changeover relay 40A 12V 360W.Load current: 40A, 12V DCCoil voltage: 12VCoil current: 120 mACoil Resistance: 100ohmContact type: 1A , SPSTMax. Switching voltage: DC80V/ 4A ~ DC 12V/ 40AMax. Switching capacity: 360WOperating temperature: -40Celsius ~ 85CelsiusElectrical life: 100 000. On/ Off min @ DC 12V/ 40A loadIN-OUT pin Type: Flat pin, 11.0 x 6.3 x 0.8 mm (L x W x T)Note: Please connect the white wire to the negative pole, the red cable to the positive pole; the blue and black cable ensure the control of the product, there is no negative or positive pole of the two cables.Package Contents: 1 x.

Model: LY2NJ (8 pins). 1 x Coil Power Relay LY2NJ. Coil Power: DC (W): ≤0.9AC (VA): ≤1.2. 1 x Sockets Base.

Mounting form: PCB. Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC. Insulation resistance: >=100M (ohm). Coil power: 0.36W, 0.45W. Size: 1.5cm x 1.9cm x 2cm.

1 PCS DC 12V 1 channel multi-function delay relay board. DC 12V LED lighting. 12V DC Motor. Latching relay modes: CH1 interface to relay a low level pulse signal, relay, give a low pulse signal relay disconnected.

This is a bistable (self-locking) relay module,Trigger once, the relay pull (and holds);Trigger again, the relay releases (and holds). Trigger mode: Low pulse trigger. USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.

10pcs SRD-5VDC-SL-C Relay. Mounting form: PCB. Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC. Insulation resistance: >=100M (ohm). Coil power: 0.36W, 0.45W. Product information.

1 x RELAY SONGLE DIP-5 SLA-05VDC-SL-A SLA-5VDC-SL-A SLA-5V. Category 2.

(5) Relay Capacity: 250vAC 10A, 36vDC 10A. the relay output state is normally open (NO) and the common end (COM) is connect, normally closed (NC) and the common end (COM) disconnected. the module output state is: normally open (NO) and common side (COM) is disconncect, normally closed (NC) and common (COM) is connect.

D2 on Reversal,D2 Off Forward. 12V, Forward 6ma, reverse: 44ma;. D1 flashing said it is timing("Timing Mode"). 4 Load current: Maximum 2A. Trigger KEY again to stop the clock(exit "Timing Mode"). Press and hold the Key for 2 seconds,D2 on,enter the Reverse "setup mode".

Five feet relay. Also note that monitor settings may vary from computer to computer and may distort actual colors. And due to the difference between different monitors, the picture may not reflect the actual color of the item.

Output current: 25A. 1pc x Solid state relay. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

Contract Load: 10A/277V AC, 10A/30V DC. Contract Resistance: ≤100mΩ（1A-6V DC）.