Hobby RC Model Vehicle Body Parts & Interior

/ Peak Current: 60A /360A. For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank. Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank.

100%25 brand new. Compact body design. High quality and durable in performance. Suitable for cross-country running, less than 1:10, big cars. High quality PCB plate, good linearity, high current capability. Specifications:Item type: brushless speed controller120A continuous current, transient current 760Asupport the 2-4 lithium battery or 4-9 Ni MH batteryBEC output: 5V/3A, switch mode.Item dimension: 16 * 6 * 5cmItem weight: 72g Package list: 1 x 120A Sensored Brushless Speed Controller Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm. Brand Unbranded MPN Does not Apply UPC 190268644808 EAN 190268644808 ISBN 190268644808.

SET OF TWO (2) DUALLY ADAPTORS MADE TO FIT ALL 1/10, AND ANY AXLE THAT USES A 4MM THREAD AND 1.9 Tire. (12mm hex). RIMS, TIRES, CHASSIS AND CAR IN THE PICTURES ARE NOT INCLUDED. ONE SET OF TWO (2).

This car engine lets the RC car imitate the real car's engine sound, link the accelerator, sound would changes with the throttle. 1 Engine Accelerator Sound Set. Makes both truck and car sounds,10 different engine sounds.

This is the optional Lower Shock Mount Lift Kit for the Axial SCX-10 Rock Crawler. 4pcs Lower Shock Mount Lift Kit. The shock mount are offset for the proper shock mount angle. This kit allow you to lift a truck to over 18 mm.

RPM ARRMA Kraton/Durango DEX8T Rear A-Arms Mud Guards work exclusively with RPM81402 A-arms (for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T). These help prevent dirt and mud build-up in your rear suspension and driveline components.

For: Axial SCX10 / SCX10 II / Traxxas TRX-4. Can Upload Custom Engine Voice and other sound effect. Support R/C PLUS APP For: Uploading voice, the firmware upgrade. Can Download and use other sound effect with RC/PLUS app.

1 x Motor Gear 21T. Cap circumference : HSP 1/10 94170 Car. Motor motor gear size: 14 11mm.

RC Car Roof Rack Cargo Elastic Net w/ Hooks For 1:10 AXIAL SCX10 Truck Black. Roof Rack Cargo Elastic Net w/ Hooks For RC 1/10 AXIAL SCX10 RC4WD Car Truck. Roof Rack Cargo Elastic Net w/ Hooks. Unscrewable width: 90mm.

LED quantity: 6LED. Fit for Traxxas TRX-4 HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI 1/10 1/8 RC Rock Crawler and so on. 5mm LED lights. Color: black.

TRAXXAS 6511 Link Bluetooth Wireless Module TQi for iPhone 4S / iPad / Mini. This is the Traxxas Link TQi Wireless Module. For use with the Traxxas Link app and TQi radio system. Traxxas Link TQi Wireless Module.

Yeah Racing Angle Type 4mm & 5mm Connector #WPT-0121. Easy to install angled connectors for any use, be it charging leads or battery leads from your esc! The plug has a plastic shielding which prevents any accidental short circuits!

Suitable for TRX4 Defender D110. Include a transparent case, a sticker, a steering wheel, a handbrake lever, a drawer, two hand levers and a foot brake. 1 x Steering Wheel. Color: as shown in picture.

For: Tamiya 1/14 Trucks. Leaf Springs (5 pcs). Material: Steel. Color: Black.

The set includes 2838 4500KV 4P sensorless brushless motor and 35A ESC. The motor is perfect for 1/14 1/16 1/18 RC Car. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines.

G.T. Power Container Truck Lighting & Voice Vibration System For RC Truck #GTP-CTLV. This is G.T. Power Container Truck Lighting & Voice Vibration System. G.T. Power Container Truck Lighting & Voice Vibration System (1 set).

Hot Racing 34 tooth, 1.0 Mod spur gear for the Traxxas Revo 3.3 and Slayer Pro 4X4. YOU WILL RECEIVE: - One (1) 34 tooth 1.0 Mod spur gear. - Super heavy duty 1.0 Mod pitch. - Gear pitch: 1.0 module. - Best use a hardened clutch bell like the Hot Racing SRVO412 (12T), SRVO413 (13T), or SRVO414 (14T).

This is Hot Racing Front and rear sway bar set for the Traxxas Slash 4x4, Slash 4x4 LCG, and 1/10 Rally vehicles. For: Traxxas Slash 4x4, Slash 4x4 LCG, and 1/10 Rally vehicles. Adjustable spring steel sway bar wire.

1 x Engine Pull Starter. Suit For: VX16 18 21. 27mm across center fixing holes top right to top left. We will reply you ASAP. Part No: R020.

Model: N10177. Aluminum Upgrade Wheel Hex Hub Nut Cover for RC1:8 Model Car. It suitable for RC1:8 Model Car. Color: Dark Blue. Model scale: 1:8. 4 x Wheel Nuts.

Equipped with motor, it provides RC boat with strong power. Suitable to use on RC boat. Type: RC Part. 2 x Turbo Jet. Type: Boat. Fuel Source: Electric 4.8V - 9.6V. Part: 380 Motor. Best fit for boats under 15".

1/10 200mm RC Car Clear Body Shell For Mazda RX7 Fit HPI TAMIYA YOKOMO Chassis. Width: 200mm. 1/10 Scale Clear RC Car Body Shell 190mm Impact Resistance For BMW M3 Model. - This product is made of PVC plastic with high strength, impact resistance and wear resistance.

1 Kit including 130 Motor+Motor Seat+Copper Coupling+15CM Shaft+Propeller. 2 x 15cm length shaft. 2 x propellers(1PC cw+1PC ccw propeller). Suitable for rc boat less than 30cm length. 130 Motor Output Shaft: 2.0mm.

ARROWMAX Allen Wremch Power Tip Set 1.5 2.0 2.5 3.0 x 80mm #AM-500902. For: Allen Wrench. 1.5 x 80mm Power Tip #AM-511115 (1 pc). 2.0 x 80mm Power Tip #AM-511120 (1 pc). 2.5 x 80mm Power Tip #AM-511125 (1 pc).

You need to choose different cooling fan in different applications. Material: Aluminum. Size: 50 50 10mm. Color: Blue & Black.

MUGEN SEIKI MBX8 Center Joint Cup Set #E2260. This is an optional Mugen MBX8 Center Joint Cup. This cup is used optionally when using the optional center dogbone setup. For: MUGEN SEIKI MBX8. MUGEN SEIKI MBX8 Center Joint Cup (1 set).

It's Brushed bustophedon ESC. (forward,reverse). Constant current 20A Max 15A< 30s Pulsed 30A< 5s. For 1/16 1/18 1/24 car and boat. Driver frequency:2KHz. Color: Red + Black. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

4pcs lights (2x White 5mm + 2x Red 3mm). This LED set is including 4pcs Leds, 2pcs white Headlight and 2pcs red Taillight leds. Color of line: Black and red. hope you could understand. Wire length: 60cm / 23.62".

Suitable for rc car or boat. Frequency: 2KHz. Compact and lightweight, easy to install and use. Function: forward, reverse, brake. Connector: short red (positive) and black (negative)------battery; long red and black(positive or negative is random)------motor; black red and white three-one line------ch2 of receiver.

Introducing the new Classic Range Rover Body Kit ( 313 mm WB ). This is a scale body kit with many fine details. Many other upgrades are also available from CCHand. Assembly required. Body mounts for SCX10, SCX10 II and TRX4.

This combo includes GoolRC 540 13T brushed motor and 60A brushed ESC, which provides both quality and performance at an affordable price. What you needed is all included in the combo! 1 GoolRC 540 13T Brushed Motor.

Teeth: 16T 17T 18T 19T 20T 21T. 21T: Approx. 16T: Approx. - A M4 set screw has been added to each pinion gear. 1 Set (6 Pieces) 32DP 5mm 16T-21T Pinion Motor Gear. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Orlandoo 1/35 OH35P01 2in1 ESC 2S Lipo w/LED Light Set #TS0001. For: Orlandoo OH35P01 1/35 Scale Crawler. Orlandoo 1/35 OH35P01 2in1 ESC 2S Lipo w/LED Light Set #TS0001(1 pc). ESC for the Orlandoo 1/35 scale crawler.

Bearing Cleaner.

Color: Silver.