Hydraulics, Pneumatics, Pumps & Plumbing

The only full range 1/8" to 3/4" O.D. flaring tool available for copper, brass and aluminum tubing. Self-centering yoke for precise 45degree flare grips without marring or constricting tube. Automatic tube height gauge for correct tubing height.

(24) 1/2" Pex manifold adapters (converts 3/4" to 1/2"). 1/2" x 500ft Blue Pex Tubing Potable Water. 1" x 100ft Blue Pex TubingPotable Water. 1000ft Pex Tubing. (2) Automatic air vent/eliminators (automatically purge air out of the radiant heat system, also allows for pressure testing).

Replaces RIDGID ® Part: 36642 (B294). Cat #: 36642 . Features:Exactly the same specification as Ridgid Cat #: 36642. exactly Fits for Ridgid 300 Pipe Threader. Safely Operate your Pipe Threader with a Foot ON / OFF Switch.

1/2" PEX tubing w/ Oxygen Barrier is common for the following radiant floor heating applications 1000ft Pex Tubing. ASTM F876: Standard Specification for Crosslinked Polyethylene (PEX) Tubing. ASTM F877: Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems.

APC works with 110 or 220V. -up to 1.5HP with 220V. This electronic unit controls start and stop of the pump when any tap or valve of the. • Starting the pump with minimum difference in water pressure (opening of a tap), thus avoiding continuous.

Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone.

Iwiss Crimping Pex Crimper Crimp Tools 1" with GoNoGo Gauge. for 1" PEXcopper crimp rings. Simply pull back on the handles to open the jaws and crimp away. come with free GO NO GO Gauge. 1 GoNoGo Gauge Tools.

Cobra Products 211530 Flat Sewer Rod 3/4 In. X 100 Ft. NEW. Flat Sewer Rod 3/4" X 100'.

Rated to handle continuous loads of 3000 PSI, this heavy duty cylinder is great for replacing cylinders, or even for building your own attachments— versatility is the name of the game. - Rated to handle a continuous load of 3,000 PSI.

110v or 220V 300BAR 30MPA 4500PSI High Pressure Air Pump Electrical mini Air Compressor for airgun scuba rifle PCP Inflator. Working Pressure: 300BAR 30MPA 4500PSI. 1x 30MPA High Pressure Air Pump 22O V.

FEMALE THREAD:½”BSPP. NPT MALE TO BSPP FEMALE length male end length female end total length of adapter ID HEX max psi (@72 degrees F). 1/8" NPT MALE X 1/8" BSPP FEMALE BRASS ADAPTER. 39" (10MM). 39" (10MM). 79" (20MM). 19" (5MM). 52" (13MM) 1450 PSI.

Charge pressure: 30MPA(it will automatic shut down when the pressure reach 30MPA). Working Pressure: 300BAR 30MPA 4500PSI. (This item is 220V, do not support 110V). -No.46 wear resistant hydraulic oil.

Brand NEW BC510 Top Screw Bench Chain Vise. Every part on this vise is 100% intercheable with Ridgid 40205 BC510 Chain Vise. More pics are available upon request. This is BRAND NEW-NEVER USED NEVER SOLD!!

BRAND NEW Rear Centering Assembly D970 fits RIDGID® 300 Threader, Replace Ridgid Part #: 44165. This Part(s) is Manufactured by Richfar Tools fits for RIDGID® 300 Pipe Threader.

Hydraulic Hose Crimper. This machine is suitable for pressing tube set of common tube, such as high pressure pipe of agricultural sprayer ,it will cause tooth wear if the machine press too hard iron sets.

Every time,after fill air,need open two pieces pressure screw,make sure compressor isn't have pressure,then can turn off the power. We have 2 kinds compressor:one working at 220-240V,one working at 100-130V.