Industrial Electric Motors

Model: 22H051F. Users can just connect the white wire to PWM signal to adjust the speed. We do provide the PWM Signal Output Module. Red wire is positive pole, black wire is negative pole, white wire is PWM, yellow wire is rotational speed output.

Easy disassembly type. 5x Miniature DC Motors. 20pcs Bronze Watch Parts STEAMPUNK CYBERPUNNK COGS GEARS DIY JEWELRY CRAFT. 50X Colorful LED Lamp Lights Balloons Paper Lantern Balloon Wedding Party Decor.

No-load Speed: 7800RPM. Long service life. Detail Image. Size: as shown in picture. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

1pcs 4-lead Nema17 Stepper Motor 42 motor Nema 17 motor 0.8A 3D printer motor and CNC. Step angle accuracy: - 5%(full step,not load). Temperature rise: 80deg Max(rated current,2 phase on). Insultion Strength--------500VAC for one minute.

Model: 1016M012G 10/1 1024:1. Gear ratio: 1024:1. Motor x 1pcs. We maintain the excellent service standards. Total length: 46mm(include shaft).

365 mini DC motor DIY small electric drill motor. Motor Body Length: approx. No-load Speed: 2000RPM@6V, 5000RPM@12V. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

Revolving Speed: 30RPM. Model: N20. 3D Printer.

5pcs PH2.0-XH2.54 Female-Female Connector Cable for Nema16 Nema17 Stepper Motor. This is a set of great connector cables used for Nema16 or Nema17 stepper motors. Connector: PH2.0(Female)-XH2.54(Female).

2 phase NEMA17 40mm 4-wire stepper motor. 1x Stepper motor. Length: 40mm. Step angle: 1.8 degree. Motor Shaft: 5mm. Color: as picture shown. within 24 hours. Repairing will normally takes 1-2 months.

L,N single phase AC 220V input. Enterprise Networking, Servers. 1 x Variable Frequency Drive. Output Frequency Range: 0 - 400Hz. U,V,W output,connect to 3-phase AC motor. Simple to operate and wire, connect to wires after removing screws.

Gearbox Reducer Motor DC 5V 12RPM. Micro 300 Low Speed DC Reduction Gearmotor. 1pcs x Micro 300 Low Speed DC Reduction Gearmotor. 【Rated Speed】 12 RPM. 【Motor Type】 Brush DC Motor. 【Efficiency】 45 (%).

Model: ER11. 13 x ER11 Collet. Power: 500W. 1 x 500W Spindle Motor. 1 x 52MM Mount Bracket. 1 x Speed Governor. High precision spindle run out : 0.01-0.03. Apply to: boring, milling, drilling, tapping, sculpture, CNC, spindle machine and other processing.

1 x External Rotor Motor. 12V can output 3.44 watts of power (output power). Shaft length: approx. No-load speed: 5730rpm. Long service life. Detail Image.

Rotating Speed:10800RPM.

Brand new and high quality Shaft Diameter: Approx. 5 mm Shaft length: Approx. 17 mm Body length: Approx. 66.7 mm Front steps diameter: Approx. 17.4 mm Former high level: Approx. 4.7 mm Body diameter: Approx. 42 mm Motor Overall Length: Approx. 98 mm Diagonal installation pitch: Approx. 28.8 mm Mounting hole size: M4 Mounting hole: 2 Cooling fan: Yes Rated voltage: 24 V (Max. 36V) Current Rating: 0.

Speed: 12500RPM. Motor length: 31.8mm. The speed of DC12V is about 12500 revolutions. Motor x 1pcs. We afford all cost if it's our fault. We maintain the excellent service standards. Its shell is made of aluminium alloy directly by precision machining.

3V no-load current 60mA;. 5V no-load current 100mA. Learn more。. other countries 4% 10% 15% 71%. Brazil Italy 8% 35% 25% 32%. France Spain. Germany 11% 29% 39% 21%. Canada 15% 46% 29% 10%.

DC 5v 2 phase 4-wire Mini Stepper Motor x 5PCS. Phase resistance: 30 ohm. 5V short circuit current: 125 MA. Motor height: 6 MM. We maintain the excellent service standards. Rod length: 20 MM.

The maximum linear speed is 25mm per second. 1 x Motor with Linear Slide. Step angle 18. Thread Rod Length 90mm. Thread Rod Pitch ±0.5mm. Slide Block Stroke 80mm. Coil resistance 15 10%Ω/phase. The motor need a A4988 driver(not included) to drive, can not directly connect to power.

Haydon LC1574W-04-025 linear actuator for sale. A pull-out from a test jig. The motor features bi-directional travel, ball bearings and a light weight. With captive lead-screw. Bipolar wiring. Linear travel / Step 0.00079” 0.02 mm.

Speed: 15800RPM. Power: 600W. Output Shaft Length: approx. 19mm (from the panel). Motor Length: approx. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

Rectangle shape and with 3mm diameter shaft and 2 pin connectors. Great replacement for the rusty or damaged DC geared motor on the machine. Widely used on auto shutter, Pan/ Tilt camera, Slot machine, Money detector, Coin refund devices, etc.Rated Voltage : DC 3V;Rated Current : 0.3A ( no load )Speed : 15 RPM;Shaft Diameter : 3mm/ 0.118""Gearbox Size : 12 x 10 x 16mm/ 0.47"" x 0.39"" x 0.63"" (L*W*H);Overall Size : 12 x 10 x 36mm/ 0.47"" x 0.39"" x 1.4"" (L*W*H)Main Color : Silver Tone;Material : MetalWeight : 10g;Package : 1 x DC Geared Motor Brand Unbranded MPN Does not apply UPC 4894462393536 EAN 4894462393536 ISBN Does not apply Designer/Brand Unbranded ISBN Does not apply UPC 4894462393536 Designer/Brand Unbranded.

12V DC 60RPM Powerful Torque Micro Speed Reduction Gear Box Motor. RPM : 60RPM. 1 x 12V DC Gear Box Motor. Power : 12V DC. Torque : 130 N cm. 3D Printer. Raspberry Pi.

12V 42mm Stepper Motor 42BYGH40-1704A for 3D Printer CNC Robot 1.8 Degree 4-Wire. /Phase Resistance. Shaft exit mode optional: A single-end shaft exit, B two-end shaft exit. Step Angle Rated Current. ✓ Outgoing mode: Two-phase four outlets (Black A Green A / Red B Blue B - ).

1 x gear motor (motor only, other accessories are not included). This motor with EMC, anti-interference ability. Material: plastic. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

1pcs RF-300EA-1D390 Solar Motor.