Industrial Routers

Powers through hard woods like oak, and steel up to 22 gauge. SHANK SIZE MM: 4.8 mm. SHANK SIZE US: 3/16". This Does Not Affect the Effectiveness Of The Bits Cutting. TIP SIZE MM: 4.8 mm. TIP SIZE US: 1/8".

Model : RT0700C. - Rack and pinion depth adjuster. - 710 watt motor with soft start. Release New Products! In case of below conditions. In Holding in your local custom. - Wrench 13mm.

It is built for profiling sinks and edges, and is perfect for pre-fabs. Works on both natural and engineered stone. Below you can find the details about your warranty written in plain English for ease of understanding.

(Rugged steel stand with vibration-dampening rubber feet. 8") with 3 Level-Loc Reducing Rings.

The assembly is quick and very simple. • ATC Tool changer for Kress and quick installation manual. Then you can fasten the "tool change spindle" just like the original. It is screwed onto the spindle shaft and attached to the spindle.

Bosch 1613EVS.

The motor on this tool spins at 28,000 RPM to make cuts up to 2-3/8 in. 1/4 in, 3/8 in.Plunge depth (in.). and 3/8 in. Sealed bearings with dust protected rocker switch for longer life.

Includes just what is in the pics.

Simply clamp your workpiece in the jig, set the bit depth and you are ready to rout. joining system CMT-Enlock1;.

Suitable for Professional Trimming Milling and Engraving work. Transparent Base. Copper Motor. If you feel our S&H prices are too high, we can provide you weight the item's weight so that you can confirm the prices for yourself.

This dovetail machine is a great buy for any woodworkers who specialize in drawers and cabinets! Work with wood put to 12" wide and 1-1/4" thick with ease to create strong, fine looking dovetail joints for your carpentry project!

The adaptor is compatible with models RP0900, RP0910, RP1110C, RP1800, RP1801, RP1800F, RP1801F, RP2300FC, RP2301FC, 3612, 3612C, 3612BR, RT0700CX2J Maktec MT361 and guide rails 194368-5, 194925-9, 194367-7.

Model Number: RT0700CX6. - Plunge Base. - 710 watt motor with soft start. - Tilt Base. - Offset Base. - No Load Speed: 10,000-30,000rpm. - Guide Rail Adapter. Release New Products!

NEW Makita Micro Adjustable Straight Guide Fence 195136-9.

New Porter-Cable fixed router base Model 75361 Type 2. ROUTER NOT INCLUDED. Shipped with UPS Ground (1 to 5 business days).

This part is compatible with the following machines.

RP1801 RP1800 RP0900 RP0910 RP2300C RP2301 RP2301 3612 3612C 3612BR. NEW Makita Micro Adjustable Straight Guide Fence 194935-6.

Micro Adjustable Straight Guide Fence ONLY.

For 3/4” and 7/8” thick wood

The Case also has wear.

Heavy duty. For professional 1/4" & 1/2" dovetail joints. For drawer & box construction in boards up to 8" wide. Makes tricky dovetailing easy to accomplish. Use dovetail fixtures to easily create tricky dovetailing.

Plunge Stroke 2-9/16″. Variable speed dial is conveniently located on the handle so the user can finely adjust the rotation speed without removing a hand or eyes from the work piece. Equipped with an electronic variable speed dial, the M12V2 produces 8,000- 22,000 RPMs for a wider range of cutting applications and a wider range of materials.

Lightly used high speed router spindle for felder shaper. I used this a few months on my KF700 until I began investing in shaper tooling. This spindle allows you to operate the shaper at much higher RPMs around 20k. This is typically the speed you would run most router bits at. I bought this last year for $950 with the belt. This is a way to save a lot and have your shaper replace your router table.

The adaptor is compatible with models RP0900, RP0910, RP1110C, RP1800, RP1801, RP1800F, RP1801F, RP2300FC, RP2301FC, 3612, 3612C, 3612BR, RT0700CX2J Maktec MT361 and guide rails 194368-5, 194925-9, 194367-7.

NO WRENCHES WITH IT. IT HAS A COUPLE DENTS IN THE HOUSING--LOOK AT PICTURES--IT DOES NOT AFFECT THE OPERATION OF IT.

In good working condition, but it does not have a trigger insert. Does show signs of use, scuffs and surface marks.

In good working condition, but does show signs of use, scuffs and surface marks.

For most Plastic and Aluminum applications.

You are buying a NEW Stanley 1/2" Collet for Stanley Router Models/Part # 92893 This part will come as pictured in new never used condition Shipping will be free to the lower 48 states

For use with the 4200 Series of Porter Cable dovetail Jigs.