Professional Products Engines & Components for GMC R3500

PRP 80007. 80007 50 oz External. All SB Ford models are made to the early short length of 3". This allows the use of a late 5.0L engine with a 50 oz. damper to be used in an early chassis where front clearance is at a minimum.

(In. ). These dampers are designed to be safely revved to as high as 6,500 rpm. Our dampers are of the highest quality and are precision machined to tolerances tighter than OEM. All Ford dampers have three sets of timing marks to cover nearly every small block damper application.

PRP 90001. 90001 External 6.750" 10000 8.4. These are our most popular dampers for externally balanced small block Chevys. They have 60° of easy to read timing marks and engraved marks every 90 degrees.

•Damper has less than. 005 runout on O.D. due to high quality machining and assembly procedures. Warranties: Any and all warranties listed are Manufacturers warranties and go by their guidelines. Any problems must be reported within 48 hours of receipt.

Powerforce Plus Harmonic Damper. Powerforce Plus Harmonic Damper; 7.5 in. Dia.; 1045 Steel;. We started out making polished manifolds for small block Chevys. Our most recent expansion of products now includes a complete line of hose and fittings along with the industry's most extensive and advanced line of fuel injection systems and components.

PowerForce Plus Race Balancers are made from bulletproof 1045 steel. The machine work on these dampers is second to none and the critical fit tolerances and balance are held more closely than OEM. The PowerForce Plus dampers are tuned to provide maximum damping in the 6500-7500 RPM range.

Notes Lightweight damper. Has removable external weight, can be converted to internal balance. Harmonic Balancer Finish Black anodized. Harmonic Balancer Material Nodular iron. Summit Bucks. We are unable to send an order without an invoice.

Part Number: 90022. The engine types may include 7.5L 7456CC 455Cu. V8 GAS OHV Naturally Aspirated, 5.7L 5733CC 350Cu. V8 GAS OHV Naturally Aspirated, 5.7L 350Cu. V8 GAS Naturally Aspirated, 6.6L 400Cu.

Powerforce Harmonic Damper. Powerforce Harmonic Damper; 6.75 in. Dia.; 1 1/8 in. Thick; Internal Balance; Modular Iron;. We started out making polished manifolds for small block Chevys. Our most recent expansion of products now includes a complete line of hose and fittings along with the industry's most extensive and advanced line of fuel injection systems and components.

Manufacturer Part Number : 80008. Note that while these engines are classes as an externally balanced engine, the counterweight is a separate. About Professional Products Professional Products was founded in the late 1990s with a primary objective to provide quality high performance parts at better values than what originally existed in the marketplace.

These dampers WILL NOT fit 1996-97 LT4 Corvette and Camaro or 1992-96 LT1 Corvette. To identify an LT4 from an LT1, the LT4 VIN number has the eighth digit as a "5" and th eLT1 has it as "P". Chevy LT1 Corvette, Camaro, Firebird, Impala, Caprice & Rodmaster Powerforce Plus SFI Race Balancer - 7.5".

Professional Products PowerForce Plus Harmonic Damper 90006. Manufacturer's Part Number: 90006. Harmonic Balancer, Powerforce Series, External Balance, Steel, Black, Ford, 260, 289, 351W. Product Line: Professional Products PowerForce Plus Harmonic Dampers.

These are among the very few high performance dampers available for this engine and by far the least expensive. What is Bonding?. And that is very bad! Nodular Iron Construction - extremly tough damper.

The damper is also a light press fit onto the crank compared to the slip fit with the factory damper. Three bolt holes on face of damper allow removal with a conventional damper puller.

Note:8 0006 Ford damper has both 3 and 4-bolt accessory bolt patterns. These dampers are made to the shortest Ford damper length, as used on '79 and earlier vehicles. They will fit the listed engines in those early vehicles.

Note:8 0007 Ford damper has both 3 and 4-bolt accessory bolt patterns. These dampers are made to the shortest Ford damper length, as used on '79 and earlier vehicles. They will fit the listed engines in those early vehicles.

These new throttle bodies are made from permanent mold castings of 356 aluminum. •70MM Polished POWER Throttle Body. •Fits ALL 1994-1995 Ford Mustang GT & Cobra 5.0L V8. OL V8. •Gasket: Throttle body to EGR Spacer.

Se Habla Espanol.

Powerforce Harmonic Damper. Powerforce Harmonic Damper; 6.4 in. Dia.; 50 oz. Counter Weight; Modular Iron;. We started out making polished manifolds for small block Chevys. Our most recent expansion of products now includes a complete line of hose and fittings along with the industry's most extensive and advanced line of fuel injection systems and components.

PowerForce Plus Race Balancers are made from bulletproof 1045 steel. The machine work on these dampers is second to none and the critical fit tolerances and balance are held more closely than OEM. The PowerForce Plus dampers are tuned to provide maximum damping in the 6500-7500 RPM range.

Harmonic Balancer Finish Black painted. Harmonic Balancer Material Steel. Summit Bucks. We are unable to send an order without an invoice.

Engine Harmonic Balancer Model or Series:Powerforce Plus. Wait for an RGA number to be issued. We do our best to display images of the actual product being sold. Occasionally, we use a universal image because the manufacturer has not supplied us with a photo.

PRP 81008. This spacer is for use on 1980 - 2001 302/5.0L and 1980 - 1997 351W engines. Professional Products PowerForce Ford Spacer. 0.875" Spacer 4 Bolt. From dyno-proven intake manifolds to EFI systems, Professional Products has the components you need to maintain optimal engine performance for your daily driver or race vehicle.

SBM 7.3 Harmonic Damper - Non-SFI.

For most applications, this not a significant difference. These dampers have TDC notch on the back rim. Harmonic Balancer Material: Steel. Harmonic Balancer Finish: Black painted.

Professional Products now has available the first affordable harmonic damper for this great new engine from Chrysler.

These dampers WILL NOT fit 1996-97 LT4 Corvette and Camaro or 1992-96 LT1 Corvette. To identify an LT4 from an LT1, the LT4 VIN number has the eighth digit as a "5" and th eLT1 has it as "P". Each damper is supplied with a series of spacers which allow one balancer to fit all applications.

Manufacturer Part Number : 80001. This would typically include 383 and 400 cid assemblies. Note that although this model damper features a bolt-in counterweight, the damper cannot be used without the weight.

Bolt-in counterweights are a major plus feature in all of Professional Products externally balanced dampers. You simply unbolt the counterweight and you are good to go. These bolt-in counterweights are manufactured to 2 grams, the most accurate in the performance industry.