Vintage Cycling Equipment

36 Holes on both Hubs. -Both Hubs spin nice and smooth. -RHS 120mm. (5 Speed).

Old school SE Racing PK Ripper aluminum frame, chromoly fork, and UNI seat. Frame is in good condition, needs a polish, new decals, and fork needs some steel wool to polish. All proceeds go to benefit the Cobb County BMX Parents Association and will be used to help kids who can’t afford to race enjoy the sport we all love.

Bianchi crankset. -90 mm Ambrosio Bianchi stem and handlebar. -rear wheel with Campagnolo 3 pieces hub,open C quick release skewer, 40 holes Nisi rim,Regina Gran Sport Corse freewheel. -Universal Extra brakeset.

Marked 9/16 x 20.

Shimano PD MX Pedals blue. never used.

Rider quality Araya 36 hole, 20x1.75 front Bmx rim. Hub is silver and unmarked. Hub spins but not freely and needs to be cleaned, regreased and adjusted. Blue Anodized finish is deep blue with little or no fade.

Classic Stronglight 93 Crankset. 52/40 Chainrings, 122mm BCD. 170mm Crank arm length. French Pedal Thread, 14 x 125. The threads and the square tapers are in great shape.

They display very nicely and are in great survivor condition. I'd rate them a strong 7 to low 8 out of 10 and display worthy. I re-greased the rear mag and the conversion kit is in great working condition and the mags spin well.

Tange Seatclamp black.

The sides of the rims were reconditioned before being laced up. Both are ACS hubs with the front having the classic ACS stamp and the rear having the Schwinn logo stamp. They are straight and spin nice.

Sungino Spider silver BMX. never used.

1985 Redline proline 800p with forks standing pegs and headset this is a nice frame and fork set Would make a great candidate for a rebuild No dents cracks rewelds.

Suntour BL long cage rear derailleur is in very good condition. I took lots of photo's to show the condition. Check out the photos!

These are primo cranks machined and filled to look like power series cranks. Comes with all hardware. Sold as clones only! 175mm

Excellent used condition. Some wear to fixing bolt, including minor rust visible in image. Pulleys are Campagnolo but may not be original. Marked 13-36 = 36-54 on cage, Brev. Int. Campagnolo on inside of upper cage. Some wear to inside of lower cage from chain rub. Pics show current condition. Please ask any questions before bidding, and thanks.

Sugino chain ring and spider gear not sure what cranks are but there 178 length rider condition with scuffs & scratches still a great piece for your rider see pics

A PAIR OF PIRATE FLAGS. IF YOU HAVE BIKE PARTS LOT FOR SALE I AM ALSO LOOKING TO BUY IN BULK. X1 BLACK X1 WHITE.

For your consideration, I have the set of 36-hole, gold Suzue hubs in near new condition. Hubs were laced once but never ridden. Axles are straight and spin smoothly for a ball bearing set.

I don't see ANY gashes, Nicks, or scrapes in the components. Also included are the original decals which remarkably have never been applied. This crank set was on my old challenger, which I am parting out over the next week or so.

Vintage parts lot see photos. See photos sold as a lot.

Classic Cinelli Volare Saddle. There are a few scratches and scuffs (see pictures).

For sale is a pre owned pair of RARE LYOTARD Berthet platform PEDALS WITH Brevete AFA CLIPS That are in good condition. The pedals do show signs of wear and could use a good cleaning but they have lots of life left in them. The thread is a 9/16. Please take a look at the pictures of the actual item you will receive and ask any questions that you may have.

Was previously matched to a Stronglight 93 Crankset but is compatible with 49d. Classic Stronglight Bottom Bracket. The spindle length is 118mm. The bearing surfaces are still smooth and in good shape.

Nice used Schwinn head badge. Sold as is, no returns

51mm badge.

Authentic High Quality old school 1980’s BMX parts and components. Original CW Racing Standard Handlebars. CW - Custom Works Racing bicycle component. Great set of authentic CW Racing Bars. Era- 1980’s.

Needs a good cleaning. Brake bridge is crimped and there is a tiny crack at the seat mast as seen in the pics. My guess is this a '82 or '83 model.

Used survivor black/silver tech 7s Missing 1 adjuster. No cracks or bends. Some rash but not to bad. Will need some clean up .

BMX old school NOS Takagi Crank. - Cr-Mo 4130. - perfect for any old school build. - made in Japan.