Vintage Electronics

Lot of 100 INS-1 Nixie tubes.

Nixie watches can work flawlessly on all continents, since it accepts 110 V and 220 V at frequencies of 50 and 60 Hz. watch case is made of wenge flywheel. (temperature), warm mood lamp. Case Material: Oak.

32 tubes with orange printing. 12 tubes with green printing.

ONE PIECE P700 Amplifier Board for Marantz 1060, 1030, 2215. part №: YD2821007-2. The PCB Board replica is made of FR4 - 150x100x1.6mm, 35µm layer copper foil, with red solder mask and HASL with lead surface finish.

IN-14 NIXIE TUBE CLOCK. • Female pins to replace faulty tubes. • Red, Green, Blue, Violet, Yellow LED backlighting.

Model: EI14. AC impedance: EI14 600 : 600 Ohm. Inductance: 290mH (±20%). Alternating-current impedance value: 600. DC resistance: 135(±%). Color: Red. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

For 9pins tube: 12AX7 12AU7 ECC83 6N11. Ceramic Vacuum Tube Socket Valve Base. Type: Tube Socket. 8 x Tube Socket. Detail Image. Item Specifics We will try our best to reduce the risk of the custom duties.

Lot of 10 pcs 6N2P tubes. Made by Voskhod plant. Made in USSR.

Solid aluminum, brushed and anodized. Turntable in the pictures is NOT included, for illustration only.

These are one of the best deals around, you get rich tone for less! New Sensor increased the price on all of their tubes this year. These are fresh tubes. Located in the Cabotville Industrial Park of Chicopee, MA.

VC 2 adjustable around 20pf to 320pf. The item will send within.

This product is suitable for EL34,KT88,6L6,6V6,5881,6550,KT66,KT100,KT120,7027. Remove the power tubes and Insert the power output tubes into the bias probe sockets. It does not need any convert from mV to mA.

This greatly facilitates the assembly process for inexperienced nixie amateurs. ● Clock deviation correction function. This feature allows you to achieve high accuracy of the clock. ● No alarm clock.

High Volatge Power Supply Unit is module intended for powering of Nixie Tubes, Magic Eye Tubes and other applications requiring high DC voltage. Module is designed as switching DC/DC step up converter. It requires low (save) DC input voltage that is converted up to setting value with high efficiency. This concept allows to application to be powered by one low voltage source only.

NIXIE TUBE CLOCK KIT. This is the IN-12 Nixie Tubes Clock DIY KIT. See my other Nixie clocks. LED BACKLIGHT AND ALARM. Programmable Alarm. Glowing dot indicates Alarm is ON. You can use any 9V, 300mA (or more) DC adapter with 5,5mm/2,1mm barrel plug autput connector ( inside, - outside).

EL34-B are g1, g2 Accurate on the gate. Is a beam tetrode, such tubes are manufactured for moderate power amplifier. Also suitable for ultra-linear circuits. EL34A board consumption is 25W, EL34-B board consumption of up to 30W.

FOR SALE 4 RFT ECC82 NEW NOS TUBES.

(Lot of 1 or more IN-14 nixie tubes. Tested and garanty working. As gift )).

Then, we let the tubes heat for 3 minutes before we test them.

NEW 35 pcs pins !

MATCHED PAIR (2 tubes) of the highly regarded Voshkod 6ZH1P-EV "Rocket Logo" ,military factory, vacuum tubes. These Voshkod tubes are the best sounding Russian 6AK5 tubes we have found! 2x Voshod 6ZH1P-EV (Matched Pair)NOS!

Use your sound card as input device and connect it to your walkman or cassette deck. Modern sound cards do not have input (only output). In this case, buy cheap USB audio converter. - connect walkman to external audio system (or put headphone close to smartphone microphone).

(Lot of 6 IN-14 nixie tubes. Tested and garanty working. As gift )).

The perf board, holding the nixies, is NOT included. "Dekatron Support", is circuitry, on the main PCB. The 5 signals coming off P5, then can be directly (electrically, not necessarily connector wise) connected to any 2-guide dekatron.

Covered with a lacquered cotton braid in black. Manufactured in 1973. I understand it is great for speakers.

Very nice original Empire tonearm with cable and new cartridge mounting plate. Good working condition.

Turntable Details. Special semi-circular rubber insulators improve the overall vibration resistance of the turntable and prevent howling. Channel balance: 1.25dB. Channels separation: 18dB (10kHz). Output: 5.0mV.

Lot of 4 pcs 6P3S-E tubes. Made in USSR.

Can also be replaced directly 403A/403B/EF95 and ordinary 5654/6J1. Large circle, enhanced mica, green powder matte word mark. GE/5654W is a military regulation, a new single boxed, very rare! Than the average 2 hand ordinary 5654 is even more durable!

Model : 6Z4. 1、 In case you have any doubt. 4、 Providing high-quality products and satisfying service.

Label / decal / sticker. just send a good picture and exact size. we can reproduce any other models or custom. ask for your desired model.

High Voltage Power Supply Unit is module intended for powering of applications which require high DC voltage, for example Nixie Tubes, Magic Eye Tubes, old radios etc. Module is designed as switching DC/DC step up converter. It requires low (safe) DC input voltage, which is converted to high output voltage with high efficiency. Output voltage is adjustable in the range from 105V to 182V, by adjusting multi-turn trimmer and this allows fine and precise voltage adjustment in all range. Extended variant also contains two more power supplies: 5V and 3,3V, which are intended to power the rest of the user application like a micro-controllers, logical and analog parts.

Lot of 2 pcs 6N6P tubes. Gold grid! Made by Novosibirsk factory. Tubes are tested on Amplitrex AT-1000. Made in USSR.

NIXIE TUBE CLOCK KIT. This is the IN-12 Nixie Tubes Clock DIY KIT & Wooden Housing. See my other Nixie clocks. CLOCK FEATURES To build the new components have been used in the NOS tubes. Wooden Housing : O ak.

Manufacturer: Voskhod factory. Analogue: 12AX7, ECC83. Date of manufacture: December, 1968. We have not tested analogues for this tube and the information is for reference purposes only. All the tubes are manufactured in the Soviet Union and can have a quality mark and other factory marking on the case.

Model: EI14. AC impedance : EI14 600 : 600 Ohm. inductance : 290mH (±20%). Alternating-current impedance value : 600. DC resistance : 135(±%).

I'm not sure it can be done but if a new coil can be installed with this original cone I think it would keep the "broken in" sound while having the reliability of the new coil.