Yukon Gear Differentials & Parts for Ford Fairmont

Spider gear kit.

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more.

Includes Premium Additive & Silicone to reseal your rear cover. All included at this price. This is not a OEM Light Duty Trac lock this is the much higher end Dura Unit. Axle spline: 28. It is noisy and not good for daily driving.

Includes Premium Yukon Additive & Premium Yukon Silicone to reseal your rear cover. Axle spline: 31. It is noisy and not good for daily driving. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction.

Trac Loc positraction carrier case. Yukon Gear and Axle manufactures a full line of standard open and positraction carrier cases for a variety of applications.

Includes Premium Yukon Additive & Premium Yukon Silicone to reseal your rear cover. It is noisy and not good for daily driving. Axle spline: 31. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction.

Pinion seal.

W/pinion bearings, pinion seal, crush sleeve, complete pinion shim kit, and marking comp W/Brush.

It features 8620 internals for maximum strength. It's patented design reduces common locker failures. All units assembled in the USA! Premium Yukon Grizzly Locker. 8.8" With 28 Spline Axles. Ford 8.8" - 28 Spline.

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more.

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more.

YUKON GEAR supplied your vehicles manufacturer with the Differential Side Bearing Spacer. We think your vehicle needs 0. Last Updated: 07/07/2017 02:48:37 AM. The engine types may include 7.5L 7456CC 455Cu.

Yukon Trac-Loc for Ford 8" wtih 31 spline axles. Aggressive Design. Fits Ford 8" with 31 spline axles. Trac Loc positraction. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction.

A notched cross pin shaft is required for this gear set. YG F7.5-373 - High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 3.73 ratio. You may also be interested in.

Part Number: PK F7.5. Pinion Install Kit; 7.5 in. 10 Bolt; Incl. Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable;. Differential Pinion Bearing Setup Kit. Step up to the quality of Yukon Gear & Axle.

Part Number: PK F8. Pinion Install Kit; 8 in.; Incl. Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable;. Differential Pinion Bearing Setup Kit. Step up to the quality of Yukon Gear & Axle.

W/pinion bearings, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking comp W/Brush.

Fits standard open differentials only.

A notched cross pin shaft is required for this gear set. YG F7.5-456 - High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 4.56 ratio. You may also be interested in.

We do our best to display images of the actual product being sold. Occasionally, we use a universal image because the manufacturer has not supplied us with a photo. Photo / Images. Wait for an RGA number to be issued.

It features 8620 internals for maximum strength. It's patented design reduces common locker failures. All units assembled in the USA! Premium Yukon Grizzly Locker. We will see if we have what you need.

YSPSPR-006 - Trac Loc spring plate for Ford 9" & 8" Trac Loc spring plate for Ford 9" & 8"

YG F7.5-273 - High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 2.73 ratio. You may also be interested in.

Part Number: MK F8. Step up to the quality of Yukon Gear & Axle. Differential Parts Kit. Minor Differential Install Kit. Minor Differential Install Kit; 8 in.; Incl. Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused.

W/pinion bearings, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking comp W/Brush.

YDGF8.8-28-1 - Yukon Dura Grip positraction for Ford 8.8" with 28 spline axles. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life.

Side gear with hub.

Yukon Gear and Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more.

Differential Pinion Shim. Pinion Depth Shim Kit; 8 in.;. Part Number: SK F8. Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.

Differential Model or Series:Dura-Grip. Wait for an RGA number to be issued.

Trac Loc spring plate for Ford 9" & 8".

Standard open carrier case and spiders.

YPKF9-PC-02 - Trac Loc Steel Clutch Plate 4 Tab Yukon Gear & Axle.

Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers. We do our best to display images of the actual product being sold. Occasionally, we use a universal image because the manufacturer has not supplied us with a photo.

Part Number: YMS8181NA. Yukon Mighty Pinion Seal. Yukon Mighty Pinion Seal; 8 in.; Rear; Drop Out Style Rear End; Removable Front Pinion Support; 28 Spline;. Differential Pinion Seal. Step up to the quality of Yukon Gear & Axle.

YPKF9-PC-03 - Trac Loc Friction Plate Single Sided 4 Tab Yukon Gear & Axle.

ALL WARRANTY STICKERS MUST BE INTACT. ALL SERIAL NUMBERS HAVE BEEN RECORDED.

Spider gear kit. Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

A notched cross pin shaft is required for this gear set. YG F7.5-411 - High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 4.11 ratio. You may also be interested in.

Part Number: YG F7.5-411. Ring and Pinion Kit. Step up to the quality of Yukon Gear & Axle. Ring And Pinion Gear Set. Ring And Pinion Gear Set; 7.5 in. 10 Bolt; Rear; 4.11 Ratio;. Axle Type: Ford 7.5 in.

YG F7.5-308 - High performance Yukon Ring & Pinion gear set for Ford 7.5" in a 3.08 ratio. You may also be interested in.