Back to home page
|Listed in category:
This item is out of stock.

Picture 1 of 3

Picture 1 of 3
Picture 2 of 3
Picture 3 of 3
Have one to sell?
Sell it yourself

TEMCo Hammer Lug Crimper V2 with holes for bench mounting (8AWG TO 4/0 Gauge)

INDU$TRIAL DEALS
(545)
Seller's other items
Contact seller
US $13.86
ApproximatelyC $18.86
Condition:
New – Open box
Out of Stock4 sold
Shipping:
Free USPS Ground Advantage®.
Located in: Brenham, Texas, United States
Delivery:
Estimated between Fri, Jul 25 and Wed, Jul 30 to 91768
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the shipping service selected, the seller's shipping history, and other factors. Delivery times may vary, especially during peak periods.
Returns:
No returns accepted.
Payments:
     Diners Club

Shop with confidence

eBay Money Back Guarantee
Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab
Seller assumes all responsibility for this listing.
eBay item number:156664138314
Last updated on Apr 27, 2025 21:52:26 EDTView all revisionsView all revisions

Item specifics

Condition
New – Open box: An item in excellent condition with no functional defects. The item may be missing ...
Brand
Temco
MPN
TH0007
California Prop 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
UPC
Does not apply

Item description from the seller

About this seller

INDU$TRIAL DEALS

100% positive feedback•1.5K items sold

Joined Dec 2007
Usually responds within 24 hours
Visit storeContact

Detailed seller ratings

Average for the last 12 months
Accurate description
4.9
Reasonable shipping cost
5.0
Shipping speed
5.0
Communication
5.0

Seller feedback (458)

All ratings
Positive
Neutral
Negative
    • b***n (1199)- Feedback left by buyer.
      Past 6 months
      Verified purchase
      accurately described, fair price, well packaged and promptly shipped; thank you
    See all feedback

    Product ratings and reviews

    Learn more
    4.9
    461 product ratings
    • 417 users rated this 5 out of 5 stars
    • 42 users rated this 4 out of 5 stars
    • 1 users rated this 3 out of 5 stars
    • 1 users rated this 2 out of 5 stars
    • 0 users rated this 1 out of 5 stars

    Good value

    Would recommend

    Good quality

    Most relevant reviews

    See all 348 reviews
    • by mikefchex
      Apr 25, 2016Top favourable review

      Lug Crimper works great!

      I have tried to crimp my 2AWG cable into a lug 3 different ways, putting it in a vise, hitting with a large hammer, and putting it is a 1-ton arbor press. The hammer blow method is my least favorite. You need a lot more than just the normal 16oz framing hammer. I used a 4lb mini sledge (I think that's what it's called). You have to make sure you get a sufficent blow the first time, or everything pops loose and you have to hope the first blow was at least hard enough to hold the wire in place so you can hit it again. The arbor press method works good enough if you have a piece of steel to span the opening in the base of the press. You also have to make sure the press is secured so it doesn't "tip" on you when you lower the handle. So my favorite way is using a vice. I put the lug in the ...

      Verified purchase: YesCondition: NewSold by: temco_industrial

    • by aalbert77
      Mar 02, 2021Top critical review

      Better than wrong crimper but not as good as the correct crimper

      Shaft was loose at bottom half. I tightened it with heavy hammer blows. Works better than a the wrong crimping tool for multiple sizes, but my mechanic was able to pull cable out of my cheap thin copper 4AWG terminal. He used the OEM Club Car terminals (thicker) and the right crimp tool. I will try again with ClubCar terminals with split at crimp which may compress with more PSI.

      Verified purchase: YesCondition: NewSold by: mtbkfrank

    • by bubbadan2.0
      Jan 20, 2020

      Great Affordable Crimper !!

      The crimper is very well built, super easy to use and should last a very long time...I used it on #4 welding cable and it worked flawlessly every time...Good Item !!!!

      Verified purchase: YesCondition: RefurbishedSold by: temco_industrial_surplus

    • by carczar956
      Jul 30, 2018

      "Smaller than you think, but really packs a punch. "

      At first I thought this little tool was not going to be up to par. It is super small at about 4 inches tall! Boy was I wrong. This little guy really packs a punch and is very easy to use. I used a small sledge hammer to make quick work of the pounding. You get a lug of your choice not smaller than 8AWG, place it in the anvil slot below the steel block, place your stripped wire in the lug, then smash it with your hammer. You'll know when you got a good crimp. It will feel solid and you're done. It is not practical to use it in the engine bay per say, but it makes quick work on the bench. I totally recommend it. Plus it comes with a 1 year no questions asked warranty card. Great tool.

      Verified purchase: YesCondition: NewSold by: temco_industrial

    • by 36krr
      Apr 24, 2022

      awesome tool

      TEMco crimper , works great ( also you can watch you tube tests ) . This has a many great features , spring loaded , mountable , good paint , good fitting parts , good price & TEMco stands behind ALL their products with a good warranty and great customer service I bought this in case my big china crimpers don't work ( plus this takes up no space in the drawer ) what happened is my big china crimp pliers don't have a die for certain size wire and this locks the wire down it works very well , all I probably need is this and if my big china pliers break this is all I will have and that's fine because I think this will last forever , and work forever !

      Verified purchase: YesCondition: Pre-OwnedSold by: temco_industrial_surplus

    More to explore: