A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
Shipping:
FreeStandard Shipping.
Located in: Flat Rock, North Carolina, United States
Delivery:
Estimated between Wed, Jul 2 and Mon, Jul 7 to 94104
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the shipping service selected, the seller's shipping history, and other factors. Delivery times may vary, especially during peak periods.
Returns:
30 days return. Buyer pays for return shipping. If you use an eBay shipping label, it will be deducted from your refund amount.
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, 65th Anniversary Edition"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
SE Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Unlimited Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
X Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, X"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
SE Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Unlimited Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
X Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, X"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Sahara Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sahara"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
Portions of the information contained in this table have been provided by cycleanything
Item specifics
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab
MPN
CE-9112P-12
Model
CE-9112P-12
UPC
817783007375
About this product
Product Identifiers
Brand
Currie
Manufacturer Part Number
CE-9112P-12
eBay Product ID (ePID)
251031089
Product Key Features
Type
Steering, Gear and Related Components
Additional Product Features
Notes
Description--2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.
Fast shipping, came earlier than expected. Great condition, packaged fantastic...not overkill like Amazon ridiculously oversized boxes. Fair price, priced just lower than other similar items. The only problem was no picture. I really needed to see what was included. I had to contact the manufacturer to figure out what was included in the kit. Would definitely buy from them again.
The item was accurately described. About description, manufacturer uses the same item number (xx15) for the Bluetooth and non-Bluetooth version. I bought the xx15 from this merchant thinking I was getting the BT version, this is not the BT version. This merchant was fast responding to my messages and was helpful by supplying contact information for the manufacturer. The shipping was fast. A+ merchant that I would recommend.
Xena Intelligent Security XX15 (#146380416691)
l***l (80)- Feedback left by buyer.
Past 6 months
Verified purchase
Best value I could find on a quality product. All parts in pics were delivered in the package as advertised in good condition. Even delivered on a Sunday like two days after I ordered it. Great experience!
We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.
Fast shipping, came earlier than expected. Great condition, packaged fantastic...not overkill like Amazon ridiculously oversized boxes. Fair price, priced just lower than other similar items. The only problem was no picture. I really needed to see what was included. I had to contact the manufacturer to figure out what was included in the kit. Would definitely buy from them again.
The item was accurately described. About description, manufacturer uses the same item number (xx15) for the Bluetooth and non-Bluetooth version. I bought the xx15 from this merchant thinking I was getting the BT version, this is not the BT version. This merchant was fast responding to my messages and was helpful by supplying contact information for the manufacturer. The shipping was fast. A+ merchant that I would recommend.
Xena Intelligent Security XX15 (#146380416691)
l***l (80)- Feedback left by buyer.
Past 6 months
Verified purchase
Best value I could find on a quality product. All parts in pics were delivered in the package as advertised in good condition. Even delivered on a Sunday like two days after I ordered it. Great experience!
