Estimated between Thu, Jun 13 and Mon, Jun 17 to 43230
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the shipping service selected, the seller's shipping history, and other factors. Delivery times may vary, especially during peak periods.
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Base Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Classic Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
4.1L 250Cu. In. l6 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
Conquista Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Chevrolet
El Camino
SS Standard Cab Pickup 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
Base Coupe 2-Door
6.6L 403Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
4.9L 301Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
5.7L 5733CC 350Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
1977
Pontiac
Grand Prix
LJ Coupe 2-Door
6.6L 400Cu. In. V8 GAS OHV Naturally Aspirated
Note:High Quality, Exceptional design & Perf define our crossover product line. They are a proven winner when it comes to bumping up the horsePwr of your daily driver or race car. Our universal X crossovers fit an overwhelming variety of classic cars w/extreme ease of installation. Our model-correct kits install like a dream. There's no skimping on materials here.All crossovers Incl dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest Quality materials, mandrel-bent, 409 stainless steel pipe resists corrosion & extends the life of your system.This 2.5 mandrel-bent X crossover kit is especially made for 94-96 Impala SS models, but will fit other GM B body cars for the same years. It will bolt right in to your existing system. Plated U-clamps are Incld.XGI10 also fits: 94-96 Caprice w/the 4.3L (Reqs factory hangers be added to driver side pipe); 91-96 Caprice w/LT1 (direct bolt-on); 94-96 Roadmaster Sdn w/LT1 (direct bolt-on); 94-96 Caprice/Roadmaster wagon (tailpipes are different due to the gas tank); 92/93 Roadmaster Sdns (will work w/a dual hump cross-member or modifications to factory cross-member).Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At Welds2.5 Pipe DiaPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: KitLifetime Warranty; RWD
Quantity Required:1
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Hardware Incl Natural 409 Stainless Steel
Portions of the information contained in this table have been provided by skidauto
Item specifics
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab
PO Box, APO/FPO, Alaska/Hawaii, Barbados, French Guiana, French Polynesia, Guadeloupe, Libya, Martinique, New Caledonia, Reunion, Russian Federation, US Protectorates, Ukraine, Venezuela
Shipping and handling
To
Service
Delivery*See Delivery notes
Free shipping
United States
Standard Shipping (FedEx Ground or FedEx Home Delivery®)
Estimated between Thu, Jun 13 and Mon, Jun 17 to 43230
Handling time
Will usually ship within 1 business day of receiving cleared payment.
Taxes
Seller charges sales tax in
Sales tax for an item #164057843693
Sales tax for an item #164057843693
Seller collects sales tax for items shipped to the following provinces:
Province
Sales Tax Rate
Return policy
After receiving the item, contact seller within
30 days after the buyer receives it
The buyer is responsible for return shipping costs.
They sent the wrong exhaust but were very on top of it and issued my refund promptly when they recieved the return. Mistakes happen but great customer service.
I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.I have used the Pypes X-Pipe kits on a number of cars. Good product at a good price, never disappointed.