Picture 1 of 5

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16" - Picture 2 of 5

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16" - Picture 3 of 5

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16" - Picture 4 of 5

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16" - Picture 5 of 5

Have one to sell?

Sell it yourself

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16"

Condition:

New

Quantity:

58 available / 135 sold

Price:

US $9.99

ApproximatelyC $13.65

This one's trending. 135 have already sold.

Shipping:

US $6.00 (approx C $8.20) SpeedPAK Standard. See detailsfor shipping

International shipment of items may be subject to customs processing and additional charges.

Located in: ShenZhen, China

Delivery:

Estimated between Tue, May 21 and Wed, May 29 to 43230

Please allow additional time if international delivery is subject to customs processing.

Returns:

60 days return. Buyer pays for return shipping. See details- for more information about returns

Payments:

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back.

Learn moreeBay Money Back Guarantee - opens new window or tab

Seller information

goodbuy711 (107496)
99.7% positive feedback

Registered as a Business Seller

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:195436459773

Last updated on May 06, 2024 20:28:12 EDTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab

Non-Domestic Product: No

Custom Bundle: Yes

Color: Brass

UPC: Does not apply

Material: Brass, Metal

MPN: Does Not Apply

Bundle Listing: Yes

To Fit: Electric Guitar

Modified Item: Yes

Brand: Unbranded

Type: Bridge

Product Type: Bridges

Model: Vintage Telecaster

Country/Region of Manufacture: China

Item description from the seller

Business seller information

Value Added Tax Number:

FR 83902864610
GB 395376254

Seller assumes all responsibility for this listing.

eBay item number:195436459773

Last updated on May 06, 2024 20:28:12 EDTView all revisionsView all revisions

Shipping and handling

Item location:

ShenZhen, China

Ships to:

Worldwide

Excludes:

Russian Federation, Ukraine

Quantity:

Change country:

Postal Code:

Shipping and handling	Each additional item	To	Service	Delivery*See Delivery notes
US $6.00 (approx C $8.20)	Free	United States	SpeedPAK Standard	Estimated between Tue, May 21 and Wed, May 29 to 43230

Notes - Delivery *Estimated delivery dates include seller's handling time, origin postal code, destination postal code and time of acceptance, and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.

Handling time

Will usually ship within 1 business day of receiving cleared payment.

Taxes

Taxes may be applicable at checkout. Learn moreLearn more about paying tax on eBay purchases

Return policy

After receiving the item, contact seller within	Refund will be given as
60 days after the buyer receives it	Money Back

The buyer is responsible for return shipping costs.

Payment details

Payment methods

ALLPARTSPIPE

99.7% positive feedback

262K items sold

Visit store Contact

Usually responds within 24 hours

Detailed seller ratings

Average for the last 12 months

Accurate description

5.0

Reasonable shipping cost

4.9

Shipping speed

5.0

Communication

5.0

Popular categories from this store

See allcategories

AMPLIFIER ACCESSORIESEFFECTS PEDAL ACCESSORIESGUITAR BODY&NECKGUITAR PARTSSPORT EXERCISETransportation InventoryOther

Seller feedback (125,354)

This item (29)

All items (125,354)

e***u (254)- Feedback left by buyer.

Past 6 months

Verified purchase

Awesome saddles! Work just as nice as they look !!

x***c (399)- Feedback left by buyer.

Past 6 months

Verified purchase

Great saddles! Intonation is now spot on on my Tele.

i***n (143)- Feedback left by buyer.

Past month

Verified purchase

Good product and fast shipping! Thank you!

See all feedback

Product ratings and reviews

Learn more

Write a review

4.8

28 product ratings

25 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
1 users rated this 1 out of 5 stars

Would recommend

Good value

Enjoyable

Most relevant reviews

See all 26 reviews

by tg-60
Nov 06, 2019Top favourable review
Looks awesome on my 2018 Fender Players Series Telecaster
11/06/2019: Fits perfectly on my Fender Telecaster, and looks great. But, keep in mind that it is only stainless steel plated over brass for the pickguard, bridge, and control plate. No it is not solid stainless steel. If you scratch it deeply, you will see the brass. Also, you seek good "intonation to be as close as possible, do not use standard round barrels that come with the bridge for the strings. Instead, buy a set of "compensated" barrels, and you will get the good intonation on all strings at 12th fret. Suggestion, set the bottom "E-A" barrel as close as you can to the back of the bridge, then the 2nd barrel (“D-G”) slightly closer to neck, then the 3rd barrel (“B-E”) slightly closer to the neck then the 2nd barrel. WARNING: Only do this with very lose floppy strings. When ... 11/06/2019: Fits perfectly on my Fender Telecaster, and looks great. But, keep in mind that it is only stainless steel plated over brass for the pickguard, bridge, and control plate. No it is not solid stainless steel. If you scratch it deeply, you will see the brass. Also, you seek good "intonation to be as close as possible, do not use standard round barrels that come with the bridge for the strings. Instead, buy a set of "compensated" barrels, and you will get the good intonation on all strings at 12th fret. Suggestion, set the bottom "E-A" barrel as close as you can to the back of the bridge, then the 2nd barrel (“D-G”) slightly closer to neck, then the 3rd barrel (“B-E”) slightly closer to the neck then the 2nd barrel. WARNING: Only do this with very lose floppy strings. When done, then Tune your strings and set intonation at 12th fret. If intonation is not correct DO NOT move barrels (forward or back) with tension on strings. The two little barrels adjustment screws for the height of the barrels will dig into the steel plating and you will see the brass and have deep gouged out scratched in the plating. Be patient and loosen strings a lot, then move barrels and retune. Do this over-and-over again until you get your perfect intonation. Lastly, getting string height do the same procedure. Loosen strings raise or lower barrels with the two little screws on each barrel, then retune. If you are not patient and do this, you will be very unhappy that you damaged your bridge plate with deep ugly scratches showing the brass. I know, because I was not patient, and moved the barrels with tension on the string and ruined the steel plating on the bridge, then I had to buy a second bridge and do it the right way. Over-all, I recommend this product, but be careful installing it. PS: in my photos, I have not set intonation and I did not change out the round barrel to "compensated" barrels yet. Enjoy, tg
Verified purchase: YesCondition: NewSold by: goodbuy711
by arkgabriel
Aug 19, 2022
An effective and beautiful addition to your Gibson!
This beautiful nickel-plated TP-6 tailpiece was originally invented by one of my earliest mentors, Milt Owun, master luthier, working upstairs at Barney Kessel's Music World, an iconic music store in the Hollywood of my early teens, which was a Gibson 'showcase' store of considerable renown. He also had designed TP-6 versions that were part of a 'trapeze' tailpiece assembly, but they, and other prototypes, have since disappeared. Fortunately, Norlin latched onto this one! The superbly-crafted TP-6 was standard equipment on many 1970s Gibsons during their 'experimental' era, such as the innovative L-6S, and they were optional on certain Les Pauls and ES-series electric guitars. Not only does this tailpiece let you zero-in on micro-fine tuning similar to a Floyd Rose, without bothering ... This beautiful nickel-plated TP-6 tailpiece was originally invented by one of my earliest mentors, Milt Owun, master luthier, working upstairs at Barney Kessel's Music World, an iconic music store in the Hollywood of my early teens, which was a Gibson 'showcase' store of considerable renown. He also had designed TP-6 versions that were part of a 'trapeze' tailpiece assembly, but they, and other prototypes, have since disappeared. Fortunately, Norlin latched onto this one! The superbly-crafted TP-6 was standard equipment on many 1970s Gibsons during their 'experimental' era, such as the innovative L-6S, and they were optional on certain Les Pauls and ES-series electric guitars. Not only does this tailpiece let you zero-in on micro-fine tuning similar to a Floyd Rose, without bothering the 'big' tuners and dealing with friction at the nut vs. the break-over angle of the headstock, but it also adds resonant mass to the 'stud' tailpiece. This gives whatever axe you're using noticeably more natural sustain and resonance, and additionally shortens the effective string length by almost an inch, making the guitar that much easier to fret! Thanks, Milt! The Epiphone TP-6 comes with studs and metric-threaded stud screws, but, no worries; it fits perfectly on your existing Gibson SAE-threaded tailpiece studs!
Verified purchase: YesCondition: NewSold by: goodbuy711
by guitar-rod
Oct 04, 2022
Great saddles at an amazing price!
Took a chance at this price, and it paid off big. Really good saddles that for me intonated as well as any 6 saddle bridge I have. And they sound great! Unless you are really close, they look like regular brass barrels. Really well done and saves a bundle over the more expensive (and likely the same) options.
Verified purchase: YesCondition: NewSold by: goodbuy711
by katsushohtan_0
Dec 13, 2022
This is heavy , but looking is more valuable !
If you want bright tone, using this brass material is one of solutions . If you want that your guitar is more cool than your friend’s one, changing color chrome to gold is good idea ! If you want more comfortable in light weight, so sorry, I recommend to search another bridge.
Verified purchase: YesCondition: NewSold by: goodbuy711
by marscotr
Feb 25, 2023
Well worth the money!
A decent TP-6 for a decent price. Remember, this is not a Gibson Vintage TP-6, or even a current Gibson TP-6. But, for a less expensive guitar, it sure works great. Feels solid, tunes correctly. It absolutely brings back memories of my old 1980 ES-335 CRS.
Verified purchase: YesCondition: NewSold by: goodbuy711

Shop by category

Picture 1 of 5

Tele Telecaster Compensated Brass Bullet Saddles Fit Vintage Tele Bridge 5/16"

Shop with confidence

Seller information

Item specifics

Item description from the seller

Business seller information

Shipping and handling

Return policy

Payment details

ALLPARTSPIPE

Detailed seller ratings

Average for the last 12 months

Popular categories from this store

Seller feedback (125,354)

Product ratings and reviews

Most relevant reviews

Looks awesome on my 2018 Fender Players Series Telecaster

An effective and beautiful addition to your Gibson!

Great saddles at an amazing price!

This is heavy , but looking is more valuable !

Well worth the money!

More to explore: