These covers are an exact fit (tight) in the factory bumper cut-outs. Advice: My truck is older and the original housings were brittle - Recommend you disconnect the harness socket leading into this housing (behind bumper) BEFORE trying to remove or pry out the old cover. Otherwise, you could be replacing the housing and a damaged socket receptacle which would involve splicing/re-wiring onto the harness pigtail and more expense. Again, an excellent replacement part.
Verified purchase: Yes | Condition: New
These license plate lens covers were the same as on my 2008 Chevy pickup. They were easy to install, took about five minutes. I went ahead and replaced the incandescent bulbs with LED bulbs while I had the covers off. The covers snap in and snap out. You just need to make sure you point the light towards the license plate because at first I had it pointed the wrong way and it would not click into place. The bulb holders install into the lens cover by rotating clockwise and un-install by rotating counter-clockwise. The bulbs slide or plug straight in. They are not the twist type bulbs. I used needle nose pliers to remove a broken bulb.
Verified purchase: Yes | Condition: New
Look much better then faded broken originals. Noted heat damage on old ones, so upgraded by installing new Dorman ones with LED lamp. Nice low maintenance upgrade.
Verified purchase: Yes | Condition: New
I was surprised to find someone had stolen one of my license plate light assemblies from the rear bumper but I found perfect fit new lens replacements from Dorman and the other small parts I needed (socket w/bulb and lamp assembly) from a local salvage yard very cheap. I got everything I needed much more affordable than getting the parts from local GM dealer.
Verified purchase: Yes | Condition: New
An easy fix to a nagging problem. Probably one of the most neglected lights on a truck, rarely noticed if out or broken, this easy to snap in replacement will neaten up the job on the back of a truck for very little money and effort.
Verified purchase: Yes | Condition: New
Great quality and fit. It matches the other one on my 06 perfectly other than the lense. The new one has those little lines through it that you see in the picture and my old one does not. But it is nothing that you see unless you basically put your head on the tailgate to look.
Verified purchase: Yes | Condition: New
Great product and they fit like a glove. Cant beat Dorman quality for aftermarket parts.
Verified purchase: Yes | Condition: New
I had one that broke several years ago and was just dangling. I finally decided to replace it. I bought 2 and replaced them in a couple of minutes. Not much more to say except they are not dangling anymore.
Verified purchase: Yes | Condition: New
Got it very fast. Twist out old bulb. Twist in new fixture. Snap in and off I go. Fast, easy and perfect match. Great price. Love it.
Verified purchase: Yes | Condition: New
Exact replacement at a lower cost than my local auto parts store. Has the same ridges as the original. Easy pop in, 30 second repair.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in License Plate Light Assemblies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
