Picture 1 of 1
![Stock photo](https://i.ebayimg.com/images/g/HCgAAOSwuOZeTj75/s-l640.jpg)
![PRO-LINE # Pro-Line Double Sided Clear Mounting Tape (10pk) MIB - Picture 1 of 1](https://i.ebayimg.com/images/g/EfEAAOSwNHRgbKK0/s-l500.jpg)
Picture 1 of 1
![Stock photo](https://i.ebayimg.com/images/g/HCgAAOSwuOZeTj75/s-l640.jpg)
![Picture 1 of 1](https://i.ebayimg.com/images/g/EfEAAOSwNHRgbKK0/s-l1600.jpg)
It just works. Microset goes under the decal, Microsol goes on top, and once it dries up, it's on there. I've yet to use it over panel lines, but so far it works great for curved pieces.The only downside I can think of is the cost for what seems like a small amount, but what you get is enough for hundreds of decals, so it isn't the worst thing in the world. The only reason not to use it this is to go with something by another brand, but this is what was most convenient for where I live. All in all, it's a great product, and thoroughly recommended.
Verified purchase: Yes | Condition: New
Microsoft and Microsol are simply the best decal solutions you can buy. They work extremely well at preparing deals and sucking them down into every paneline. Even the thickest decals are no match for these products, it might take a few applications but they will lay down beautifully.
Verified purchase: Yes | Condition: New
These products worked well for me. I used the kit to mold a set of company name decals on HO model train buildings. The decals needed to mold themselves around some sharp corners as it crossed the walls of the building. The decals were about six inches long and I used a dull hobby knife to coax the decal into the 90 degree corners as it wrapped around posts that extended from the outside walls of the building. The decals came out looking very smooth and conformed and blended into the corners perfectly.
Verified purchase: Yes | Condition: New
It's mostly diluted white vinegar but the right strength, so you don't have to deal with mixing different ratios, and the bottle is small so it's easy to store and doesn't take up space.
Verified purchase: Yes | Condition: New
Use water to separate and slide the decal from the backing paper onto your model. Use Micro Set to position and seal, particularly the edges of the decal. With difficult (thicker) decals and/or surface irregularities, use Micro Sol in addition to Micro Set. Follow directions and watch a tutorial video. I have always had satisfactory results when using one or both to apply and set my decals. Much better results than water alone.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Paints
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Paints