With this adapter I was able to mount a prewar Carl Zeiss lens from 1935 onto a modern Nikon Z6. It was a bit difficult to lock the Contax RF lens onto the adapter, but this was most likely due to the age of the actual lens. I was able to get a nice snug fit after a bit of elbow grease. High quality adapter! Very pleased.
Verified purchase: Yes | Condition: New
I recently purchased another Fotasy brand adapter which works just fine. So, I presumed I can trust this brand, and purchased this Nikon F mount with aperture ring for G lenses to Nikon Z mount adapter. F Mount Tightness When I attempted to attach a lens to the F mount end, it wouldn't go on all the way. So, I tried a couple more lenses with the same result. With the third lens, I tried twisting a little harder, and prayed I don't break the lens. To my surprise, the lens twisted further onto the bayonet mount. I gave it a stronger twist, and the mount lock clicked. I removed the lens, and tried it again. Then, I tried the other two lenses. As it turns out, the F mount on the adapter is a little out of specification. So, a lot of force is required to mount and dismount lenses. I've owned enough Nikon F mount camera bodies and F mount accessories to know this adapter's F mount is faulty. Mount Lock Release Lever The mount lock pin release lever has a wedding cake shaped button. It functions, but I dislike it. The shape implies that it should be pressed in. However, it must actually be pulled toward the camera body. This is a bad design. Other F mounts on the accessories I have which are made by Nikon employ a press-in button in the same place. Alignment Indicator Nikon camera bodies, lenses, and lens accessories all have a white dot on the exterior for aligning with the white dot on the exterior of the item with which it mates. This Fotasy adapter instead has a red dot on the mating surface for the F mount. This is counterintuitive. A white dot on the exterior should be used. Mechanical Inclination Requirement I'm not bragging, but I'm more mechanically inclined than most. My partner, however, is average. She was unable to figure out how to mount and dismount a lens onto and from this adapter. On the other hand mounting and dismounting the same lens onto and from an old Nikon extension tube was very easy for her - and me. Price Fotasy's adapters are priced lower than their competition. Although you might get lucky to purchase one of their adapters which works fine, I recommend against this particular one. Spend a little more and get something that has better design and quality control. I won't be purchasing Fotasy products again.Read full review
Verified purchase: Yes | Condition: New
Excellent quality! ...as title said. Very well made adapter. Fits perfectly. Tight, good quality fabrication, good materials. I am so happy to finally be able to use my old Canon FD lenses. I definitely recommend this adapter.
Verified purchase: Yes | Condition: New
Upon receiving I attached to my Sony E mount camera and then attached my old Konica lens. Fit just the way it should. Haven't had time to out and put all to use, but the fit was fine.
Verified purchase: Yes | Condition: New
I only use Fotga adapters as they always fit their respective mounts perfectly. Inexpensive and they open up a whole realm of legacy glass for your Mirrorless camera. I love em!
Verified purchase: Yes | Condition: New
Fits perfectly and means I can do away with ancient adaptall adapters + a second adapter to the camera. Fotasy adapters work great on E and FE mount bodies. Have at least a dozen, never had a problem.
Verified purchase: Yes | Condition: New
Fit and finish are good but the release mechanism is not well engineered and hard to use. But the price is fantastic. So I chose to get one for each often used Leica lens. Less $$$ than better adapters. I finally gave up and bought a much better adapter and will sell the three of these that I bought.
Verified purchase: Yes | Condition: New
It fits on the lens and camera so works as advertised. I like these inexpensive adapters enabling me to use fine old lenses.
Verified purchase: Yes | Condition: New
This product is exactly what I needed for my Rokinon 24mm f/1.4! On the Z6 you have to cover the contacts with masking tape otherwise the camera gets confused and continually tries to focus, and won't let you adjust the aperture. So this adapter allows the camera to stop freaking out, turns the lens into a manual, and everything is good after that. I used my Spyder LensCal to verify that the peak focusing highlights are still accurate in this manual mode.
Verified purchase: Yes | Condition: New
No electronics, but works very well for manual adjusted lenses. Fits both camera and lens perfectly. Very well made and sturdy. Highly recommend this product to anyone needing an adapter of this type.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Lens Adapters, Mounts & Tubes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Lens Adapters, Mounts & Tubes
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
