Picture 1 of 1
![Picture 1 of 1](https://i.ebayimg.com/thumbs/images/g/GT0AAOSwuJFdyohV/s-l500.jpg)
Picture 1 of 1
![Picture 1 of 1](https://i.ebayimg.com/images/g/GT0AAOSwuJFdyohV/s-l1600.jpg)
Hold up on 6s in slash 4x4 front and rear. I used lictite 222 on pin screws for good measure. Old dog bone type kept popping out of the out drive on jumps. These are great.
Verified purchase: Yes | Condition: New
stripped axle stubs within 2 runs on 3s system. poor design and getting replacement parts are a joke. rear axles are too long and hex nuts keep bottoming out on the axles not allowing a good seat against the rim. stripping out hubs and axles is not a repair I wanted to keep chasing. buy team integy ones. you dont have to change your hex hubs and will have no problems. Will never buy again.
Verified purchase: Yes | Condition: New
Okay. Would be great if it came with instructions. No idea what the O rings are for? There are extra parts too, I assume for other models. But again it doesn't tell you which is for what. They all more or less fit. INSTRUCTIONS PKEASE!
Verified purchase: Yes | Condition: New
These are terrible shafts. I broke the joint within a week and the pin screws would back out even with loctite. This is all on 3s lipo and stock pinion. They also had to send me a new CV joint out of the box because one was binding right out of package.
Verified purchase: Yes | Condition: New
Application is on Traxxas Stampede 4x4 VXL. These are all metal axles and I anticipate them lasting much longer than the plastic OEM axles. The original Traxxas plastic axles have a bad habit of the plastic u-joints twisting and the holes widening and cracking and then breaking. Some things I noticed with the GPM rear axle set. 1. The hollow aluminum shaft I recommend lubrication with graphite and noticed you need to rotate and insert the splines a couple of times to find a good position that allows the aluminum axial tube to slide freely. The next thing you should know is since these are all metal they weigh more than the stock ones, the significance here is they are not balanced and add a slight vibration to the driveline that was not present with stock axles. This does not detract from disability and smoothes out at top speed. Also the blue color goes well with the blue of the motor and other components in the Stampede 4x4 VXL. These are truly engendered well and I recommend them.Read full review
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Cars, Trucks & Motorcycles
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Cars, Trucks & Motorcycles