Picture 1 of 1
Stock photo
Picture 1 of 1
Stock photo
Walbro WT-194 Carburetor
PowerToolReplacementParts (108499)
97.9% positive feedback
Price:
US $93.18
ApproximatelyC $127.90
+ $13.49 shipping
Returns:
30 days return. Buyer pays for return shipping. If you use an eBay shipping label, it will be deducted from your refund amount.
Condition:
- Buy It NowWalbro OEM WT-158-1
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandWalbro
MPNWT-194
UPC0656721588701
ModelWT-194
eBay Product ID (ePID)19010043012
Product Key Features
TypeCarburetor
All listings for this product
Ratings and Reviews
Most relevant reviews
- Nov 25, 2018
Right part at good price
I recently needed a new carb for my Stihl ms260. After looking around I found this one on eBay and ordered it. It arrived a day ahead of schedule and in new condition. As others have said you may have to swap the snorkel from your old carb to the new one so you can continue using the same type air filters. This is easily done by removing 4 screws and swapping the plates. I also installed a new fuel filter, air filter, and spark plug from another seller. After getting everything back together it fired up and ran after about three or four pulls. I’m sure the carb is set very close to factory specs but you may find that a very minimal adjustment is necessary to get it to the end users preferences. After installation I ran my saw for about 2 hours with zero issues or complaints. I would not hesitate to purchase this item again from this seller if needed.Verified purchase: YesCondition: New
- Jan 03, 2016
Perfect replacement!
If ,you have a Stihl chainsaw that doesn't have the H/L adjustment screws and it just isn't running right...in my case it was a 2000-ish Stihl 026 Pro, do NOT buy a cheap aftermarket carb (they don't fit right OR work) OR mess with a carb kit. Just buy this new 194 Walbro and bolt it in and GO. I couldn't be more pleased. Perfect replacement and the saw runs great again. Best money I've ever spent on this chainsaw!! If your saw has the Intellicarb setup with the snorkel on it going to the air filter, no problem! Just take the snorkel off your existing carb and put it on this one. 2 minutes, so easy a caveman can do it. And Go make some wood.Verified purchase: YesCondition: New
- Sep 16, 2016
Stihl 026 Carb Upgrade
I had an 026 with the WT403A carb (L only adjustment). I put this WT194 on the saw and I'm really woke up. The saw runs so much better with the H L adjustments. Runs like a brand new saw. Incorporate a muffler mod and double the performance gains. Awesome price as well. Fast delivery. Don't hesitate to buy from this seller.Verified purchase: YesCondition: New
- Oct 30, 2018
Walbro WT-194 carb with Stihl MS260 saw
I replaced the original carb on my MS260. I needed to swap the top plate on the new carb with the top Intelli Carb inlet from my original carb - easy. Also the H/L adjustment screws plug/block did not fit with the new carb - so I simply used silicone to close the holes. The saw started right up with the new carb. But after running for a short time, it was obvious the idle was too high because the chain was running on idle. I simple adjustment of the idle screw corrected the issue. I've used it a couple times since and it has run very good with no further issues. So I even though it does bolt right in, I wouldn't call it an "exact" replacement of the original carb. A couple of small things had to be done as mentioned above. I did know that I'd need to swap the top plate. I consider all of that to be very minor. I'm happy with how the saw runs with the new carb.Verified purchase: YesCondition: New
- Sep 22, 2016
new item performs very well
This is a brand new item still in the box. Took me awhile to get around to installing it but finally got it done. Runs now! Old carb was worn out. Used this item in a very old Stihl chainsaw. Happy I ordered it.Verified purchase: YesCondition: New
- Sep 02, 2022
Perfect!
So easy to install, if you're not sure there are plenty of youtubers that can show you how to get the job done, just be careful when opening the trigger handle so you don't lose anything when it comes apart. Started right up after I changed the spark plug too which was the real problem in the first place.Verified purchase: YesCondition: New
- Mar 07, 2017
Stihl carb
Carb works great on the stihl 026 chain saw. It was slightly different them original, I had to block the whole in air filter since new carb did not have have the extra air port as the old one. Also the carb has the high adjustment which the old carb did not . Fast delivery. KenVerified purchase: YesCondition: New
- Nov 21, 2019
Looks like original
Bought this carb for my Stihl 026 that is 27 years old and i rebuilt the original carb twice.It didn't run quite as good after the second time so I decided to try a new carb. I haven't had a chance to put it on yet but it looks just like the original and even has 'STIHL' stamped on it. I have high hopes. I will update later. Fast shipping too.Verified purchase: YesCondition: New
- Nov 28, 2018
Walbro carburetor
The product came when it said it would. The product was of excellent quality. I got what I payed for, I was very pleased.Verified purchase: YesCondition: New
- Jun 26, 2019
Buy a Walbro, not a Chinese knock-off.
My Stihl MS 260 Pro would not start, flooded constantly. The original carburetor was a Walbro WT-403B, which did not have an adjustable high speed mixture screw. The WT-194 was a perfect fit after the substitution of the compensating top plate from the old carb, and after installation the saw started on the 2nd pull, as it should. A little tweaking of the mixture and idle speed screws and I now have a saw that starts easier and runs better than when it was new 14 years ago.Verified purchase: YesCondition: New
