 |
This product works very well but in order to repair cracks in a trailer shower tub I needed to buy like 7 or 8 packages to do the job. It comes with a 5" strip of fiberglass matting but the actual epoxy would cover quite a bit more than that. I tried to stretch it a bit but because of the fast setting of the product it was difficult. I have no problem with the end result, it worked well for me but there was a learning curve and I had to make several buys to finish the project.
Verified purchase: Yes | Condition: New
It was exactly what I needed for repairing a bathroom sink around the drain. I removed the drain, sanded down the area around the drain hole and it worked perfectly. This was a plastic/gel coated composite plaster type typical sink. I thought the Almond was lighter than I had expected. You have to follow the directions very carefully when using this and be well prepared as to how to use it and preparation. Have a clock nearby for timing the amount of time you can work with it. I stayed under four minutes. It sets up with a nice smooth coat. It is thin in consistency, so be prepared for that.
Verified purchase: Yes | Condition: New
After mixing both parts together per the directions, I applied the compound to the damaged portion of the steel enameled tub (almond color). This was after I had roughed up the surface with 180 grit sandpaper and wiped the area down with lacquer thinner. By the next morning, the compound still had not dried at all ! In addition, during the mixing process, I noticed that the almond color in the small packet was mostly dried up and was very heavy when I attempted to remove it from it's packet so it was VERY difficult trying to blend it into the two part compound I had just mixed in order to get the proper shade. This all happened in minutes, so there was no delay in application. I had the distinct impression that this was an older package and was perhaps well beyond it's "sell by" date. The stuff I received was garbage. Don't waste your money.Read full review
Verified purchase: Yes | Condition: New
High quality stuff, easy to apply as long as you think it through and put some tape around the area and make sure it doesn't run too much. But my porcelain chip had black underneath it, and the black is still visible through a pretty thick layer of this "white" patch. So now I need to find some good white paint as well...
Verified purchase: Yes | Condition: New
Work exactly as described!!! If mixed, and done properly, it makes for a great repair!!! A lot of people say it was still tacky, after 3 days, but I did the repair 3 hours ago, and it has already set up, and isn't tacky at all!!! I would definitely recommend this product for any tub repair!!! Thanks for a great product!!!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Multi-Component Epoxies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
