 |
Received it and got it running late. Had to go get compressor oil and fill it up. Ran it one cycle and called it a night. Next morning found air compressor pump had leaked out all it's oil. Oil running down side of tank and on my nice sealed concrete floor. Not happy at all. Air compressor has a cheap tin plate on the entire bottom of it held in with looks to be silicone and screws. At least they could have painted the cheap tin to prevent it from rusting. I seriously doubt this air compressor could last a year. It is not a commercial or industrial grade air compressor head. The oil drain plug if that is what you can call it, is cheaply tapped into the cheap tin plate. So when the compressor is mounted, you have to remove the mounting bolts just to change compressor oil. This compressor is more like for the part time user. I highly do not recommend you waste your money on it. Buy a cast iron one instead. Typical Chinese quality. Better buy 2 of these so you can make one good one. Read full review
Verified purchase: Yes | Condition: New
Appears to be a decent pump, especially for the money.nicely packed in a heavy duty carton.only issue I had with it was I had to new drill holes to mount it…. although my compressor tank mounting plate (on the tank) has holes for several different type compressors,, none of them would work with this compressor.
Verified purchase: Yes | Condition: New
Rusty base plate plate, filled unit with oil hooked up to motor and tested it, unit ran less than 30 seconds before it seized up. Took apart and found a rod seized on the crankshaft. Looks like it was too tight and the oil hole was not countersunk leaving bearing material on crank just where the oil hole is the other rod was nice and free moving.
Verified purchase: Yes | Condition: New
Well packaged for shipping, not a bad compressor for the price, flywheel pulley a bit weak but overall a good deal. I have found a good choice for the compressor inlet 1/2 inch propane flex pipe . Hopefully the compressor will last... for home use regularly. Thanks
Verified purchase: Yes | Condition: New
Installed this on a 26 gallon tank, from 0 to 120psi takes 1 minute 50 seconds. It keeps up with my die grinder also!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Air Compressors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
