These are the best offset mounts made, period. It's also 20% the price of the big guys. I tried the high dollar arisaka and trijicon mounts but they don't extend far enough to clear my scope turrets. Almost half the reticle would be occluded by the elevation turret. These offer a quick and clear reference point even with tactical scopes that have long turrets. It may say UTG but they're the only ones making the right kind of product for my particular needs. I recommend these for use with LPVO's or even full-power scopes because it makes finding your target at magnification so much easier. Typically you have to dial your scope way back to see your target and then zoom in on it before you can begin the firing sequence. With this setup you can get the red dot on the target, flip it back over to the scope and it'll be right on target. Way faster and you don't have to mess with your scope settings. #1Read full review
Verified purchase: Yes | Condition: New
I own 2 of these UTG offset mounts now. I have 2 other brands/ types of offset mounts. The UTG includes the correct angle and extended height which puts the RDS on the bore axis and close to the same view height as the LPVO it is paired with on the AR. The low profile portion of the mount that attaches to the rail fit under the LPVO mount cantilever. At this point I only have a few hundred rounds on the UTG mount but I see no indication of any problems with the mount.
Verified purchase: Yes | Condition: New
if you look around the price of a 45 deg red dot mounts are 100+$. this one is the right angle and distance from the rail. right in line with my scope with a turn of the wrist. i use it with a holosun 407c. shake n wake, just grab and go.
Verified purchase: Yes | Condition: New
The mound exceeded my expectations in terms of quality. Quality of the machine work was excellent. The only question I have is durability as I have not put it through rigorous testing, only time will tell.
Verified purchase: Yes | Condition: New
Perfect for adding that dot or optic to your AR…is extended far enough to where the LPVO or main scope isn’t in the way…great product and very well made
Verified purchase: Yes | Condition: New
So I searched for the right 45 rmr mount for a long time. In the end I decided on this utg mount, and it was a win. It’s lightweight, it’s solid, it fits the trijicon and trijicon style rmr ok but just know, some trijicon style rmr’s have smaller front mounting holes and you WILL HAVE TO GRIND THE FRONT MOUNT POSTS OFF for this to work on some models. It’s not a big deal if you have some very basic ability. Over all, great mount ESPECIALLY FOR THE MONEY!
Verified purchase: Yes | Condition: New
Easy install and rmr synced up had no problem zeroing in. Would recommend 👌
Verified purchase: Yes | Condition: New
Worked out well!
Verified purchase: Yes | Condition: New
RMR footprint, clean install works great 👍
Verified purchase: Yes | Condition: New
Good quality, a great addition to an AR.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Scope Mounts & Accessories