 |
The setup was fairly easy, watch the video tutorial first tho. We had to enlist some help from our online stamp dealer so the thermal printer worked properly. Once all that drama resolved itself; we are tickled pink. This is our first thermal printer so all the differences are amazing. No ink used in the laser printer, no wasted time inserting a sheet of labels, a roll of labels appears to be the same cost or less of the 4 6 sheet of labels, labels that don't smear. We are extremely happy with this printer!
Verified purchase: Yes | Condition: Pre-owned
It took a little time watching youtube videos on how to set it up, then another video on how to adjust your print settings. Once that was done, the product works absolutely amazing and WHY DIDN'T I BUY THIS 3 YEARS AGO? If you run a business and still use an inkjet or laser printer, the amount of time this thing will save you is worth every penny! Never tape over a label again! You can dip these labels in a bucket of water and rub all over them, the lines are still crisp and perfect. CONS: My particular unit must have an extremely loose power connection, if you touch the cords or move the unit ever so slightly I lose power. So once you get it in position and have power, don't touch it!
Verified purchase: Yes | Condition: Pre-owned
Prints way faster then the LP2844 we replaced. However the directions provided, while very detailed, lead to a path of problems. I ended up not using the driver or directions they provided and just installed the zebra driver instead from the zebra printer site. It then worked perfect, so I would try the zebra driver first, then if you have issues try the driver they recommend as a last resort.
Verified purchase: Yes | Condition: Pre-owned
It was a little more involved to get set up the first time. I purchased it used I had to locate to correct software to download then it still took me a few attempts to get it to print label the correct size. Since then easy as can be and it has already been a cost saver. It saves me on ink and labels.
Verified purchase: Yes | Condition: Pre-owned
Printer is relatively easy to install... however, to get really clear prints, I recommend ditching the drivers Windows installs automatically and downloading the driver from Seagull Scientific's website. After that, I slowed the print speed down and increased the darkness to 16 and now I have a label printer that gives me a clear print every time... not too shabby at all.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Printers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Printers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
