 |
Kit is well made and installs pretty easily. I had a 14yr old install it with a minimal amount of guidance. The toughest part was two of the four factory bump stop bolts twisted off due to corrosion. If yours is older or has some rust you may want to use penetrating oil or heat to help get these loose.
Verified purchase: Yes | Condition: New
I found it to be slightly challenging to mount the brackets to the springs the heads of the bolts slide under the axle perch making it almost a 2 person task. After I got the brackets on it went quite easily onto the truck. I was able to install without even jacking up the truck! Total time was maybe 2 hours. Truck has the 2-1/2 front level kit from rough country and 7500# air springs with 40lbs. In picture
Verified purchase: Yes | Condition: New
Easy afternoon project. Everything fit perfectly
Verified purchase: Yes | Condition: New
Is a very good tool for your truck but only I will recommend to add more Teflon (white tape) to the air valve because if you don't do it you will have a air leak!
Verified purchase: Yes | Condition: New
The week after i installed these I had 24000 pounds behind one ton dually. These kept the back end from sagging at all. The bags were rated for a lot more air than I put in them.
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Self-Leveling Suspension Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
