 |
I received the product in a timely manner and was pleased with the quality of the product. I only needed the passenger side hub since I had already replaced the driver side several years before. I only wish I had known about this deal then because I paid less for the pair of hubs than I paid for one hub of exactly the same hub at Autozone 3 years ago. I now have a spare just in case I have issues with the driver side hub. They have been great so far though.
Verified purchase: Yes | Condition: New
So far so good! I read where some people had wheel sensor issues that still woulf cause them to have an abs light but i had no issue. Bolted up like oem and i also compared then to a delco hub and they were almost exactly the same. Been 1,000 miles and im running 35s and i drive the truck harder than most. Hubs are doing great!
Verified purchase: Yes | Condition: New
The Moog Hub Bearings are of the highest quality. Easy installation. Took about an hour for each side. My vehicle now rides straight and smooth. No more "wheel wobble" and tire wear. I had to replace the hub bearing at about 110,000 miles. You need to replace the bearings if you notice unusual tire wear, front end noise, (especially when making a tight turn) and steering wheel "wobble". To inspect the hub bearings: Jack up vehicle. Set on jack stands. Grab tire on top and bottom. Move tire back and forth. If tire has "play" . . . Check ball joints. If not ball joints . . . It's probably the hub bearing. It might be a good idea to check the front axles at the same time. /.
Verified purchase: Yes | Condition: New
Parts are described as original Moog parts. the parts had Moog on them but boxes were plain and didn't have Moog marking. I ordered them to get rid of an ABS problem that I was having and since the originals had 140,000 I figured I'd just go ahead and do both sides. Replaced old with the new parts and my ABS problem is gone, parts fit perfectly. Can't complain about the parts for the price they charged and do work as they should. Only time will tell how good they are, but can't complain now. Installed on 2005 GMC 2500HD
Verified purchase: Yes | Condition: New
Was replacing my hub due to a grinding noise didn't have any lights on. After replacing the hub the abs light came on. I ohmed out the sensor and found that it was 40k ohms less then the factory one that was working, I swapped out the sensors and it fixed the issue. It is no simple task to just swap the sensor due to the aftermarket machining on the hub the spacing is off by quite a bit, I used a micrometer to measure the correct depth, they had 4 spacers on the cheap sensor, I used 2 thick ones on the oem sensor that had 300k miles on it and all is working fine. It does seem to be genuine moog part, it's in a moog box and has moog printed on it.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Wheel Bearings, Hubs & Seals
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
