5stars
8ratings4stars
1rating3stars
2ratings2stars
5ratings1star
2ratings
Well designed43% agree
Good value53% agree
Stylish60% agree
18 Reviews
Ok case
Pro well design layout pre-installed fan puts out good wire management is pretty decent and the cost is unbelievable
Cons case came dented with missing pieces of paint still worth the deal I'll hit it with some black rustoleum high gloss. Some of the screws provided will not fit this case.
Overall well worth the money and good for a budget build.😃😀😄🙃😊Read full review...
Verified purchase: Yes | Condition: new | Sold by: newegg
Very cheap even for the pricepoint, save for literally anything else
I remember getting my 20$ rosewill xmb1 case a while back and that blows this hunk of junk out the water, this has so many questionable design choices that other cases dont have at this price point!!!
-There is a MASSIVE exhaust port at the top of the case BUT you cant mount fans to it unless you superglue them to the case itself
-Top mounted power supply, which isn't bad in itself but the power supply will COVER about half of that exhaust port so it is needlessly letting dust in
-very cheap build quality, as again my old rosewill has better metal and if you use a bit of strength you can easily bend or break pieces of this case
-side panel is a cheap tinted piece of plastic that would have been better of it was just metal because its so dark you can barely see inside
-Only two hard drive mounts, one at the bottom of the case which is perfectly fine, but the other mount is VERTICAL rather than horizontal for some reason which restricts airflow into the case
-One 80mm fan which is bloody loud, other cases at this price point normally have a front and exhaust fan
-it looks like during the design process they added a intake port for the PSU and forgot about it when they moved the PSU mount to the top, so not here is a vent hole bottom of the case but its too small to do anything at all so its just another way for dust to get in
-no free 120mm fan included so thats another 10-15$ on top of this so its more of a 40$ case plus shipping so the case is really 50$, at this point just go get a decent mid range case!!!
-front metal ''mesh'' feels like if something brushes against it theres going to be a giant gaping hole in it
-cheap chrome plastic feet instead of it being rubber
-side panel triggers my OCD by being ever so slightly bent and curved at the edges
STAY AWAY FROM THIS CASE!!! THERE'S SO MANY BETTER PRODUCTS AT THIS PRICE POINT!
Read full review...
Verified purchase: Yes | Condition: new | Sold by: newegg
Good price, bad case. Inadequate room for cables in back, the thin slide-in teeth holding the back panel down are stupidly flimsy. A nightmare getting
Good price, bad case. Inadequate room for cables in back, the thin slide-in teeth holding the back panel down are stupidly flimsy. A nightmare getting the back panel on. Had to bend the teeth back into place repeatedly. Main area depth also too shallow, can't even fit a standard 120mm CPU air cooler. Motherboard tray is so thin and bendy, the cables in the back push it up against the back of the motherboard, which could cause a short. No good way to run front fan connectors back to motherboard.Read full review...
Verified purchase: Yes | Condition: new | Sold by: newegg
Cheap case - bare minimum.
Wish case could have had optional support for an internal 5.25" drives so as to support a cage for four 2.5" hdd or a 3.5" HDD cage stack. Room for 2 x 2.5" drives mounted on the panel and that's it. Case fan molex was very cheap as the pins shifted when trying to seat with PSU molex. Good enough if you need something cheap to put a board, graphics card and two drives in. Would probably have given higher praise at $20-$30 price point.Read full review...
Verified purchase: No
Buy something better - you will thank yourself later
Extremely cheap case, poorly designed, one showed up with a massive dent in the side which I can only imagine happened at the factory - they're pretty well packaged, no damage on the boxes. Mishandling this case will bend it - no kidding. The side panel is plastic, bends very easily, and does not fit to the case very well. The design of this case puts the power supply at the top, which could be okay, but it is a skinny case. Having the power supply at the top makes the computer badly want to tip over. Spend an extra 5-10 dollars and get something nicer, or at least something with the power supply at the bottom. Read full review...
Verified purchase: Yes | Condition: new | Sold by: newegg
Well, it’s okay.
This case has a very strange design to me. It’s got a top mounted power supply, only a single 80mm rear fan while the front has 3 120mm fan spaces. It’s got very strange hard drive mounting spots. Cable management isn’t the best. I’d get this case If it was maybe $30. It was cool to build in, but I wouldn’t do it again. There are definitely better options for the price. Read full review...
Verified purchase: No
5 star
There are some questionable areas on this case but all in all ya I'd go with this again if needed, I'm using a small Asus 1050 ti phoenix that fits fine
Verified purchase: Yes | Condition: new | Sold by: newegg
Whos a Good case, your a good case. Good boy.
Works good for me. Don't understand why people are complaining about this case. It's thirty-five bucks and everything seems high quality.
The only modification I did was drilling mounting holes for the water cooler. Very satisfied with how everything fits so nicely and compactRead full review...
Verified purchase: No
Just what I needed.
The lit fans are nice optics. Nice case.
Verified purchase: Yes | Condition: new | Sold by: newegg
Reasonable price
right sizes mid tower case
Verified purchase: Yes | Condition: new | Sold by: newegg