About
All feedback (63)
- technicalaim (41381)- Feedback left by buyer.Past yearVerified purchaseRasche Antwort und prompte Bezahlung. Perfekt! Danke!
- allextr (9231)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- ganfeii1_4 (75355)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- jslavich4 (772)- Feedback left by buyer.More than a year agoVerified purchaseAwesome sauce
- nathanr417 (1727)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- chenyu2019 (755)- Feedback left by buyer.More than a year agoVerified purchaseGreat buyer!!! Instant payment!! Thanks so much!!!
Reviews (2)
Mar 25, 2023
Clean sine wave, good capacity.
Good price. Works well as described. I was able to convert the unit to an AC-DC variable supply with additional parts mounted in the front junction box.
Jul 10, 2011
HP 462535-001 good product. Not recommended for heavy gameing graghics.
When purchacing the hp 462535-001 motherboard, consider adding
a new graghics chip thermal pad and cpu chip thermal paste.
berore installing the thermal fan unit over the cpu and gpu
chips, clean any oxide from the fan unit heat sinks at the
points of contact with a rubber eraser and blow out all dust
from the fan unit. Use new ceramic based paste on both sides
of the "graghics chip thermal pad" so the pad makes good contact at both the heat sink and graghics chip. I don't recommend a copper shim type thermal over the graghics chip
on this motherboard, because the spring tension on the fan unit mount screws put too much pressure on the graghics chip
and can tilt the fan unit up off the cpu socket area. Next,
put new ceramic thermal paste on both of the cpu chip and the
fan unit heat sink area that will be in contact with the cpu.
No thermal pad will be used on the cpu chip, just the paste.
Install the fan unit by tightening the mount screws in a sequence starting at the cpu socket to insure a good flat surface installation at the cpu socket.