About
All feedback (757)
emit-time (876)- Feedback left by buyer.
More than a year ago
Verified purchase
Excellent buyer, paid promptly, good comms, would deal again anytime,highly regarded.
cocopops2409 (6896)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
simplydirect2012 (88511)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
a***w (128)- Feedback left by buyer.
More than a year ago
Verified purchase
Fast delivery, item was as described, seller also helped advise on gps antenna.
2010megameg (1527)- Feedback left by buyer.
More than a year ago
Verified purchase
Fast payment,perfect ebay buyer.thank you
tierod69 (276001)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, Thank you From Tierod69
Reviews (5)
Jan 08, 2019
Good T Cut
Surprised by how well this product worked - I had some strange black stubborn specs along the car roof rail line and spots on the roof - without too much effort the T Cut easily removed it - I think it would be a good product for light scratches or swirl marks too with the polish leaving a nice finish - happy customer
Jan 08, 2019
Autoglyn - great for removing road tar
Applied conservatively this product easily removed the annoying sticky road tar splashes without leaving any traces or blemishes behind - very happy motorist at long last :-)
Nov 21, 2018
MR2 MK3 Winter Toaster Roadster
8 of 9 found this helpful Great Value OEM type heated seats kit - I fitted this kit to my Toyota MR2 MK3 - Quality individual heated seats 2 way rocker switches orange illuminated to match factory switches - came with clear instructions regarding fitting elements unlike the wiring instructions which were in my opinion very basic or open to interpretation of the installer.
The looms/connections to the 4 individual thermo controlled heated seat elements are plenty long enough to reach each heated seat switch locations and the power looms also reached the intended termination area drivers foot well which is within close proximity to the ignition sensed trigger feeds required for the two appropriate rated relays (not supplied or battery power cable fuse crimps solder cable insulation tools etc).
For providing power to the heated seat kit I ran the appropriate size rated power cable fused at the battery down to the drivers foot well to serve two individual heated seat 10amp rated circuits. The power cable went into a two way terminal box allowing for two power outputs
for two individual heated seat relays circuits appropriately rated to take the load - contact pin 30 battery positive & contact pin 87 heated seat positive power which comes fused at 10amps. Took two separate ignition sensed 12v+ positive feeds off the ignition barrel to the relay trigger coil energizer Pin 86 (fused at 1amp each circuit) (pins 86 from each relay can be linked together with one ignition sourced feed) - Pin 85 earth / chassis ground - the negatives feeds from each heated seat loom was also earthed at the same chassis ground earth point. The relays take the load of each circuit with relies on a ignition sensed trigger feed to energize/close the contact pins 30 & 87 creating the two individual circuits - this method of wiring will prevents the vehicle battery from going flat - when the vehicle ignition is switched off the relays will de-energize opening the relay contacts 30 & 87 disconnecting the power/load to each circuit regardless whether you left switch on.
Post testing no issues - happy - heated seats elements heat up quickly - look forward to some cosy winter journeys ....