Dedicated & focused on both Street & Track Performance, Tuning & rare hard to find Aftermarket Parts & Accessories for the BB4 & BB6 92-01 USDM, JDM, EDM & UKDM Honda Prelude...
240 LED Amber/White Roof Top Bar Enforcement Emergency Flashing Strobe Light 15W
Oct 25, 2019
RUGGED HOUSING,GOOD SWITCH,BRIGHT WHITE/WEAK AMBER,WEAK MAGNETS-Needs 7-10,SUCTION CUP STYLE COVERS, LOWER PROFILE DESIGN,LESS GAP BETWEEN ROOF/LIGHTS
THE BAD:
-The Amber LEDs are not bright enough during the day, they are okay at night.
-Needs More Strobe Settings than just 7
-The cord could be a little longer, it should be fine for most cars up to mid-size, but very wide cars, trucks, and vans it may not have enough cord, but had enough slack to tuck away hidden behind the B-Piller Interior Trim Panel and underneath the carpet and passenger seat, where it finally makes it's way up in my mid console to the cigarette lighter on my Acura TL. It barely reaches my cigarette lighter #2 on my center dash panel.
-Just a very little tad Bit of moisture buildup in those cold mornings, when the sun starts warming up it quickly goes away. I haven't had it long enough to determine how clear the plastic will stay, and whether it will yellow or not?
-But THE WORST THING is it FLEW OFF WHEN I WENT TO PASS A CAR ON A CURVED SWEEPING CORNER ON THE HIGHWAY AND DENTED UP THE REAR OF MY ROOF AND SCRATCHED MY PAINT!!! AND ALSO WHILE HANGING DOWN OFF TO THE SIDE OF MY PASSENGER REAR DOOR BOUNCING AROUND ALL OVER THE PLACE, IT SCRATCHED AND DENTED THE DOOR TOO, NEARLY BREAKING OUT MY WINDOW!!!
-SO 5 MAGNETS ARE TOO WEAK!
The other roof lights they sell on the market that have 7-10 MAGNETS on each Round Mounting Disc seem to be the ones that handle Triple Digit Speeds Well. As well as having the better Suction Cups (instead of these flat-non suction style ones, that also fall off by the way cause I lost one on the highway that day, due to being slightly too big for the discs.
Basically they need to design (curved spoiler type mechanism like those windshield wiper wind deflectors they make) a clear plastic/black rubber underneath the lights housing, and almost be flush with the bottom of the magnet bases, to help deflect the air up and over the light so wind on highway doesn't get underneath them and create wind turbulence and lift the housing up. Basically where there's like 1" inch of gap space between car roof and bottom of light housing.
Between having more low profile flush magnets with the housing, and an added deflecting wind design to make it more low profile... And More 7-10 Magnets, brighter Amber LEDS I think this would be the best looking Roof light out there.
With that said I would like to see those 2 improvements, little longer cord on a newly revised & Improved Design!
This is why I gave it 2 Stars I would have gave it 4 stars if it had Better Suction Cup Style Covers (that didn't fall off!) and if the Magnets would've held it at highway speeds (So the LIGHT WOULDN'T FLY OFF)...
U HAVE TO FLIP THE LIGHT PARALLEL TO YOUR CAR IN ORDER TO HO AT HIGHWAY SPEEDS... SIDEWAYS FORGET IT!
THE GOOD:
-The WHITE IS SUPER BRIGHT, Even in Day from half a mile can see it! and placement of LEDs completely filling up, and using the entire shape of the Housing looks rad!
-The Socket Switch is nicely convenient design
-The PLASTIC HOUSING IS DURABLE & RUGGED!
Found that out when the light flew off my roof a few times passing cars!...
My only question is who's gonna pay for the dents in my roof and scratches/slight dents in my door!!!
1 of 1 found this helpful
fits TOYOTA NISSAN HONDA MAZDA RADIATOR CAP KH-C19 0.9KG NEW MADE IN JAPAN
Apr 26, 2022
Looks to be of Good quality, I would definitely recommend for price
Seems to be quality made in Japan so it seems to be made out to Sankey brand. Now is how long will it last up to the test of Time... Will have to have a full review in 7 years to keep 5 stars... I would say at least a 4.5 ⭐ for now is most likely imminent
For ACURA CL TL HONDA ELEMENT Rear Black Brake Calipers And Ceramic Pads
Nov 03, 2019
Very durable Caliper Finish, Stop GREAT! Nicely slotted & chamfered Brake Pads. Solid 8 out of 10 based on Budget, Value & Performance. So far so GOOD
The Prep work on the calipers bare metal isn't the most upwards of top notch prep work, only reason for 8 out if 10. but paint seems to be very durable, stop great! I did used to see for $160 and if you send your old calipers back with the return label they send you, you get $60 back. So basically was able to get for $100... Wish still could have gotten that deal otherwise I'd mostly would have giving em a 8.5 instead if they still were. Let's see how long the Brakes last!